eControls Comfort365 C365W21 Kullanıcı Kılavuzu - Sayfa 4

Termostat eControls Comfort365 C365W21 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. eControls Comfort365 C365W21 4 sayfaları.

Setting the Nighttime Airflow in Heating
This option enables the user to set the maximum allowable upstairs
airflow in heating DURING NIGHTTIME OPERATION, not to exceed
the installer set maximum allowable upstairs airflow in heating.
Upstairs
Heat
Airflow %
Downstairs
Night
MENU
ENTER
NEXT
Setting the Nighttime Airflow in Cooling
This option enables the user to set the maximum allowable upstairs
airflow in cooling DURING NIGHTTIME OPERATION, not to exceed
the installer set maximum allowable upstairs airflow in cooling.
Upstairs
Airflow %
Cool
Downstairs
Night
MENU
NEXT
ENTER
Selecting Manual or Auto Airflow
This option is only displayed if your installer enabled Manual Airflow
Control during installation. AUTOMATIC AIRFLOW is the default. In
AUTOMATIC AIRFLOW CONTROL, the airflow is adjusted by the
thermostat. In MANUAL AIRFLOW CONTROL, the user must adjust
the airflow. The airflow range is defined by the installer during set up.
Upstairs
Airflow %
Auto
Downstairs
MENU
NEXT
ENTER
Homeowner resources are available
online at www.Comfort365USA.com,
including a consumer video
describing the features and outlining
the operation of the Comfort365.
Touch the
MENU
key to display
NIGHTTIME, UPSTAIRS AIRFLOW IN
HEATING indicated by nAF Heat.
Touch the UP/DOWN keys to adjust the
airflow.
Touch the MENU key to save and go to
next option or touch the ENTER key to
save the options and return to normal
thermostat operation.
Touch the MENU key to display
NIGHTTIME, UPSTAIRS AIRFLOW IN
COOLING indicated by nAF Cool.
Touch the UP/DOWN keys to adjust the
airflow.
Touch the MENU key to save and go to
next option or touch the ENTER key to
save the options and return to normal
thermostat operation.
Touch the MENU key until the following
thermostat screen is displayed.
Touch the UP key to select AUTO. Touch
the DOWN key to select MANUAL.
Touch the
MENU
key to save and go to
next option or touch the ENTER key to
save the options and return to normal
thermostat operation.
Cleaning the Touch Screen
This option disables the touch screen for 30 seconds to enable the
user to clean the touch screen by wiping down with a soft, damp cloth.
Touch the MENU key to display the CLEAN DISPLAY option indicated
by CL. The timer will count down and return to normal thermostat
operation after 30 seconds. The remaining time is displayed on the
screen.
Touch the MENU key to display CLEAN DISPLAY
option indicated by CL.
Press ENTER to start the 30 second count down.
The touch screen is disabled during this time.
NEXT
ENTER
Or, press NEXT to return to normal thermostat
operation.
Error Messages
If the C365 detects a communication
error with the wireless Upstairs
temperature sensor or sensors, a
blinking message appears where the
time is normally displayed. The display
will alternately show Snr and the sensor
number.
Check that the batteries are installed
correctly or replace them if they are old.
How to test the wireless sensor communication can be found in the
Installers Manual.
The thermostat will display nP when
power is lost. The batteries will maintain
the time and once power is restored, the
thermostat will return to normal
operation.
Install Two AA Batteries
The batteries power the clock when
24VAC power is lost. Slide the battery
cover downward and install the two AA
batteries as shown.
Warranty
This thermostat is warranted to be free of defects due to workmanship or
materials under normal use and service for a period of 5 years from date of
installation and not longer than 6 years from manufacturing date code.
eControls, 26072 Merit Circle #110, / Laguna Hills, CA 92653
949-916-0945 www.Comfort365USA.com
Upstairs
Airflow %
Cool
Set To
Auto
Schedule
Downstairs
Inside
Upstairs
COOL
SYSTEM
Airflow %
Cool
Set To
AUTO
Auto
Schedule
Downstairs
MENU
MODE
FAN
Inside
COOL
SYSTEM
AUTO
MENU
MODE
FAN
Upstairs
Airflow %
Cool
Set To
Auto
Schedule
Downstairs
Inside
COOL
Day
Tu
SYSTEM
AM
AUTO
MENU
MODE
FAN
-
+
-
+
eControls
eControls