eControls T200WLD Kullanıcı ve Montajcı Kılavuzu - Sayfa 6

Termostat eControls T200WLD için çevrimiçi göz atın veya pdf Kullanıcı ve Montajcı Kılavuzu indirin. eControls T200WLD 8 sayfaları. Direct damper control

Sayfayı Yazdır
Accessing Installer Options
Access installer options by pressing and holding the unmarked
key below the System key for seven seconds. The LCD will
display Option 01 for setting the Zone number.
Press or hold the NEXT key to advance to the next option.
The LCD will advance to Option 10 and return to Option 01.
Press the CANCEL key to exit the option selections. Press the
ENTER key to save all options.
Set To
Inside
AUTO
SYSTEM
Day
Schedule
Mo
AM
NEXT
MENU
HOLD
ENTER
Zone
Option
CANCEL
NEXT
ENTER
01 Changing Zone Number
If only one wireless thermostat is used in the installation, the
default Zone 01 and Home Address 01 can be used. Skip to
Option 03. If multiple wireless thermostats are used, each
thermostat and damper have to be programmed with a unique
Zone number. The first thermostat can use the factory set
Zone 01 and Home Address 01.
Press the
UP/DOWN
keys to
set the Zone number for the
thermostat from Zone 1 to 8.
Press the NEXT key to go to
the next option. Or, press the
ENTER key to save and exit
the installer options, or press the
options without saving.
Press and hold the
unmarked key for seven
seconds to access the
installer options.
Option 01 will be displayed.
Zone
SYSTEM
Option
CANCEL
NEXT
ENTER
CANCEL
key to exit installer
02 Changing the Home Address Number
The Home address is used when two or more installations are
within 300' of one another. This allows neighbors, different
departments or floors to use the wireless thermostats and not
interfere with each other. Skip to Option 04 if no other user
groups are nearby.
Press the
UP/DOWN
keys to
set the Home Address
number for the thermostat
from Home 1 to 8. If multiple
departments are installing
wireless thermostats, each
department should use a
different Home number to insure the Damper in another
department is not inadvertently changed.
Press the NEXT key to go to the next option. Or, press the
ENTER key to save and exit the installer options, or press the
CANCEL key to exit installer options without saving.
03 Setting Deadband Temperature
The difference between the setpoint and room temperature
must exceed the deadband temperature before the thermostat
makes an adjustment to the airflow. If the deadband is set for 1
degree, the room temperature must be more than 1 degree
warmer or cooler than the setpoint temperature before the
damper position is changed
Press the
UP/DOWN
keys to
set the Deadband
Temperature. Range is 1 to 5
degrees.
Press the NEXT key to go to
the next option. Or, press the
ENTER key to save and exit
the installer options, or press the
options without saving.
04 Set Update Time Interval
The Update Time Interval
determines how often the
thermostat sends data to the
wireless damper actuator.
Shorter times will use more
battery life and provide faster
response to temperature
changes. The default setting of 10 minutes is a good
compromise in battery life and responsiveness.
Press the
UP/DOWN
keys to set the Update Time from 5 to 30
minutes.
Press the NEXT key to go to the next option. Or, press the
ENTER key to save and exit installer options, or press the
CANCEL key to exit installer options without saving.
6
Home
SYSTEM
Option
CANCEL
NEXT
ENTER
SYSTEM
Option
CANCEL
NEXT
ENTER
CANCEL
key to exit installer
SYSTEM
Option
CANCEL
NEXT
ENTER