eControls RT2 Ev Sahibi ve Montajcı Kılavuzu - Sayfa 8
Kontrol Ünitesi eControls RT2 için çevrimiçi göz atın veya pdf Ev Sahibi ve Montajcı Kılavuzu indirin. eControls RT2 12 sayfaları. Wireless whf control
Ayrıca eControls RT2 için: Kullanıcı ve Montajcı Kılavuzu (8 sayfalar)
Sayfayı YazdırWiring FC3J to 1-Speed PSC or ECM
For 1 speed WHFs, the red and yellow wires are not
used and need to be cut off at the PC board. Use wire
nuts to connect the FC3J wires to the WHF wires and
the incoming 120VAC power wires. Orient the FC3J and
electrical box as shown.
Model FC3J
FC3J Wire
Connects
High Speed (Purple)
WHF High Speed (Black)
Med Speed (Yellow)
Not Used. CUT OFF AT PCB
Low Speed (Red)
Not Used. CUT OFF AT PCB
Neutral (White)
WHF Neutral (White) and
120VAC Neutral (White)
Ground (Green)
WHF Ground (Green) and
Power Ground (Green)
120VAC (Black)
Power 120VAC (Black)
INSTALLATION
Wiring FC3J to 2-Speed PSC
For 2-speed WHFs, the yellow wire is not used and
needs to be cut off at the PC Board. Use wire nuts to
connect the FC3J wires to the WHF wires and the
incoming 120VAC power wires. Orient the FC3J and
electrical box as shown.
Electrical box on WHF
Ground
screw
High Speed (Purple)
Power
Med Speed (Yellow)
Cord or
Low Speed (Red)
Romex
8
Model FC3J
FC3J Wire
Connects
WHF High Speed (Black)
Not Used. CUT OFF AT PCB
WHF Low Speed (Red)
Neutral (White)
WHF Neutral (White) and
120VAC Neutral (White)
Ground (Green)
WHF Ground (Green) and
Power Ground (Green)
120VAC (Black)
Power 120VAC (Black)
Electrical box on WHF
Ground
screw
Power
Cord or
Romex