Ecoological AeroBox Kurulum Kılavuzu - Sayfa 2

Otomobil Aksesuarları Ecoological AeroBox için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Ecoological AeroBox 4 sayfaları.

www.ecoological.com

1. Place AeroBox™ in upright position and slide it in to the tailgate opening of your truck until the door of

the AeroBox™ would be flush with the tailgate when the tailgate is closed. The AeroBox™ should be

centered in the opening. Make sure there will be no interference with closing the tailgate by closing the

tailgate with the box in position.

2. With the AeroBox™ in desired location, center punch a hole location roughly centered in the load floor

hand access cut-out and the channel at the base of the AeroBox™ as shown below for both the left-side

and right-side attachment locations. Drill a 3/8" inch hole through the floor of the AeroBox™ only. Make

sure hole location will land on flat area on truck bed surface (not on side of corrugation). If not, reposition

box.

3. Using previously drilled holes as guides, drill through the truck bed floor (and liner, if present) at both

locations.

Do not move AeroBox™ until both holes are drilled. Re-check alignment, if necessary.

4. Remove the AeroBox™ and re-drill/enlarge the holes in the truck bed with a 1/2" drill.

www.ecoological.com

Installation Manual-Standard

THUMBSCREW ATTACHMENT INSTALLATION

10/2017

AB Standard Assembly 10-2017