Yamaha Acoustic Kullanıcı Kılavuzu - Sayfa 15

Müzik Enstrümanı Yamaha Acoustic için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Yamaha Acoustic 35 sayfaları. Yamaha acoustic guitar-accessory: supplementary guide
Ayrıca Yamaha Acoustic için: Kullanıcı El Kitabı (1 sayfalar), Kurulum Kılavuzu (11 sayfalar), Tamamlayıcı Kılavuz (32 sayfalar)

Sayfayı Yazdır

OK, now try and edit a patch to your liking.

* For more information on parameters of individual effects, refer to the separate "Effect List" sheet.

* Parameters for the patch(effect) can only be adjusted when the MAGICSTOMP is in its normal operating mode

(when a patch is selected and the effect is switched "ON"). Parameters can not be adjusted if the effect is switched

"OFF" or when the MAGICSTOMP is in the Store Mode ( page 18), Name Edit Mode ( page 20) or Tuner

Mode ( page 24).

After creating something you like, use the store operation (

MAGICSTOMP. Please be aware that if another patch is selected before carrying out the store op-

eration, or the power is disconnected, all changes you made will be lost and the data will return to its

original condition.

If you have already seen the "Effect List", you will have noticed a long list of parameters in each

patch's effect list that do not appear on the MAGICSTOMP's display. Each patch contains a variety of

parameters besides those that appear on the display.

With "Deep Edit", which is described in the next section, you can get in and edit all of these param-

eters as well as assign parameters to the MAGICSTOMP's control knobs. Give the Deep Edit mode

a try. Using it to make precision edits you can create a wide range of sounds.

Deep Edit

Any of the parameters in the currently selected patch can be edited. You can use this, along with the

ability to select a different effect type, to create original patches.

Press the [STORE/EXIT] button.

"PRESS[STORE]1sec" will appear on the lower half of the display.

* If you press the [STORE/EXIT] button when a Preset Patch is selected, the corresponding User Patch num-

ber will automatically be selected as the destination patch number for storing.

Press the AFR/ON/OFF switch once and release quickly (within one second).

You are now in the Deep Edit Mode and the display should appear as shown below.

* If you press the AFR/ON/OFF switch for more than 1 second, you will enter the Name Edit Mode (

20)

Deep Edit Icon

Create your own sound

page 18) to save your settings in the

Deep Edit Icon

page