Yamaha Acoustic Kullanıcı Kılavuzu - Sayfa 23

Müzik Enstrümanı Yamaha Acoustic için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Yamaha Acoustic 35 sayfaları. Yamaha acoustic guitar-accessory: supplementary guide
Ayrıca Yamaha Acoustic için: Kullanıcı El Kitabı (1 sayfalar), Kurulum Kılavuzu (11 sayfalar), Tamamlayıcı Kılavuz (32 sayfalar)

Sayfayı Yazdır

If the application of a single band filter does not take care of the feedback, press

the switch as described in step

filters can be set.

* The following display will appear if all 5 filters have been set.

The AFR Function's settings are not saved along with patch data. And the

AFR Function's settings are cancelled when another patch is selected.

CAUTION

Be careful. Constant feedback at loud levels can cause damage to equipment.

Switching the AFR Function OFF

To switch the AFR Function OFF, follow the instructions below and change the setting to "AFR FUNC-

TION OFF". When the AFR Function is switched OFF in a patch that uses the "Acoustic Multi" effect

type, the switch will operate as an effect ON/OFF switch, the same as when used with other effect

types.

After pressing the [STORE/EXIT] button, press the AFR/ON/OFF switch two times

to select the "Effect Type Select" display in the Deep Edit Mode.

* When pressing the switch two times, make sure the switch is released within one second both times.

Until the following display appears, press and hold (for about four seconds) the

AFR/ON/OFF switch.

The display shown above will appear for one second and then return to the display that was

selected before the [STORE/EXIT] button was pressed.

When "AFR FUNCTION OFF" is set, the " " icon located to the right of the patch number will be

shown, even when a patch that uses the "Acoustic Multi" effect type is selected.

To switch the AFR Function ON again, follow steps

once again.

Auto Feedback Reduction (AFR) Function

and set a second filter. A maximum of 5 band

and

described above