Yamaha Arius YDP-103 Kullanıcı El Kitabı - Sayfa 16
Müzik Enstrümanı Yamaha Arius YDP-103 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha Arius YDP-103 28 sayfaları.
Sayfayı Yazdır
Selecting & Playing Voices
Setting the Touch Sensitivity
You can specify the Touch Sensitivity (how the sound
responds to your playing strength).
While holding down [GRAND PIANO/FUNCTION],
each press of the G4 key switches the Touch Sensitiv-
ity setting in sequence: Fixed, Soft, Medium and
Hard. Also, when Operation Confirmation Sounds is
set to "On, " the number corresponding to the setting
of the Touch Sensitivity is spoken.
Touch Sensitivity
Voice
Touch
Confir-
Sensitivity
mation
0
Fixed
1
Soft
2
Medium
3
Hard
NOTE
The Touch Sensitivity settings may have little or no effect with the
PIPE ORGAN and HARPSICHORD Voices, since these
instruments are not normally responsive to keyboard dynamics.
Transposing the Pitch in Semitones
You can shift the pitch of the entire keyboard up or
down in semitone in order to facilitate playing in dif-
ficult key signatures, or to easily match the pitch of
the keyboard to the range of a singer or other instru-
ments. For example, if "+5" is selected, playing key C
produces pitch F, letting you play a song of F major as
though it were in C major.
Setting range: -6 – 0 – +6
To transpose the pitch down:
While holding down [GRAND PIANO/FUNCTION],
press the F6 key to decrease by 1 semitone.
16
YDP-103 Owner's Manual
G4
G4
Description
The volume level does not change at all
regardless of whether you play the key-
board soft or hard.
The volume level does not change
much when you play the keyboard soft
or hard.
This is the standard piano touch
response (default setting).
The volume level changes very widely
from pianissimo to fortissimo to facili-
tate dynamic and dramatic expression.
You have to hit the keys hard to pro-
duce a loud sound.
To transpose the pitch up:
While holding down [GRAND PIANO/FUNCTION],
press the G6 key to increase by 1 semitone.
To restore the original pitch:
While holding down [GRAND PIANO/FUNCTION],
press the F#6 key.
Fine-tuning the Pitch
You can fine tune the pitch of the entire instrument in
approximately 0.2 Hz increments. This lets you accu-
rately match the keyboard pitch to that of other
instruments or CD music.
Setting range: 414.8 – 440.0 – 466.8 Hz
To lower the pitch:
While holding down [GRAND PIANO/FUNCTION],
press the G#6 key repeatedly to lower the pitch in
approximately 0.2 Hz increments.
To raise the pitch:
While holding down [GRAND PIANO/FUNCTION],
press the A6 key repeatedly to raise the pitch in
approximately 0.2 Hz increments.
To set the pitch to A3 = 442 Hz:
While holding down [GRAND PIANO/FUNCTION],
press the A#6 key.
To reset the pitch to the default (A3 =
440 Hz):
While holding down [GRAND PIANO/FUNCTION],
press the B6 key.
F#6 (Original pitch)
F6 (-1)
G6 (+1)
G#6 (-0.2 Hz)
A#6 (442.0 Hz)
A6 (+0.2 Hz)
B6 (440.0 Hz)