Yamaha Clavinova CLP-240 Kurulum Kılavuzu - Sayfa 4
Müzik Enstrümanı Yamaha Clavinova CLP-240 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Yamaha Clavinova CLP-240 24 sayfaları. Accessory cd-rom for windows
Sayfayı Yazdır
USB MIDI Driver
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
To operate the instrument from your computer via USB, you'll need
to install the appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back and
forth between sequence software and the instrument via a USB cable.
Computer
Sequence
Software
USB cable
Driver
The installation procedure differs depending on the operating system.
n If you have questions concerning the USB-MIDI driver, see
"Troubleshooting" on page 5.
Installing the driver on Windows 98/Me
1 Start the computer.
2 Insert the included CD-ROM into the CD-ROM drive.
3 First, make sure the POWER switch on the instrument is set to
OFF, then use a USB cable to connect the USB terminal of the
computer (or the USB hub) to the USB TO HOST terminal of the
instrument. When the instrument is turned on, the computer
automatically displays the "Add New Hardware Wizard." If the
Add New Hardware Wizard does not appear, click "Add New
Hardware" in the Control Panel.
n For Windows Me users, check the radio button to the left of
"Automatic search for a better driver (Recommended)" and click
[Next]. The system automatically starts searching and installing
the driver. Proceed to Step 8. If the system does not detect the
driver, select "Specify the location of the driver (Advanced)" and
specify the CD-ROM drive's "USBdrv_" folder to install the driver.
4 Click [Next].
The window enables you to select the search method.
5 Check the radio button to the left of "Search for the best driver for
your device. (Recommended)." Click [Next]. The window enables
you to select a location in which to install the driver.
6 When using Windows 98, check the "Specify a location" box, click
"Browse..", then specify the USBdrv directory of the CD-ROM
drive (such as D:\USBdrv_\) and continue the installation.
When using Windows Me, check the "CD-ROM drive" box and
uncheck all other items. Click [Next].
n When using Windows Me, the system may ask you to insert a
Windows CD-ROM while it checks for the driver. Specify the
USBdrv directory of the CD-ROM drive (such as D:\USBdrv_\)
and continue the installation.
7 When the system detects the driver on the CD-ROM and is ready
for installation, it is shown as a message on the screen.
Make sure that the "YAMAHA USB MIDI Driver" is listed, and
click [Next]. The system starts the installation.
8 When installation is complete, a message indicating so appears.
Click [Finish].
n Some computers may take about ten seconds to show this screen
after the installation is complete.
The driver has been installed.
Accessory CD-ROM for Windows Installation Guide
4
MIDI instrument (Clavinova, etc.)
Installing the driver on Windows 2000
1 Start the computer and use the "Administrator" account to log into
Windows 2000.
2 Select [My Computer | Control Panel | System | Hardware | Driver
Signing | File Signature Verification], and check the radio button to
the left of "Ignore -Install all files, regardless of file signature" and
click [OK].
3 Insert the included CD-ROM into the CD-ROM drive.
4 First, make sure the POWER switch on the instrument is set to
OFF, then use a USB cable to connect the USB terminal of the
computer (or the USB hub) to the USB TO HOST terminal of the
instrument. When the instrument is turned on, the computer
automatically displays the "Found New Hardware Wizard." Click
[Next].
5 Check the radio button to the left of "Search for a suitable driver
for my device. (Recommended)." Click [Next].
The window that appears enables you to select a location in which
to install the driver.
6 Check the "CD-ROM drives" box and uncheck all other items.
Click [Next].
n The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the "USBdrv2k_" directory of the
CD-ROM drive (such as D:\USBdrv2k_\) and continue the
installation.
7 When the installation is complete, the system displays
"Completing the Found New Hardware Wizard." Click [Finish].
n Some computers may take about ten seconds to show this screen
after the installation is complete.
8 Restart the computer.
The driver has been installed.
Installing the driver on Windows XP
1 Start the computer and use the "Administrator" account to log into
Windows XP.
2 Select [Start]
[Control Panel].
If the control panel appears as "Pick a category", click "Switch to
Classic View" in the upper left of the window.
All control panels and icons will be displayed.
3 Go to [System]
[Hardware]
check the radio button to the left of "Ignore" and click [OK].
4 Click the [OK] button to close System Properties, and then click
"X" in the upper right of the window to close the Control Panel.
5 Insert the included CD-ROM into the CD-ROM drive.
6 First, make sure the POWER switch on the instrument is set to
OFF, then use a USB cable to connect the USB terminal of the
computer (or the USB hub) to the USB TO HOST terminal of the
instrument. When the instrument is turned on, the computer
automatically displays the "Found New Hardware Wizard."
n Some computers may take a few minutes to show this screen.
7 Check the radio button to the left of "Install the software
automatically. (Recommended)." Click [Next].
The system starts the installation.
8 When the installation is complete, the system displays
"Completing the Found New Hardware Wizard." Click [Finish].
n Some computers may take about a few minutes to show this screen
after the installation is complete.
9 Restart the computer.
The driver has been installed.
[Driver Signing Options], and