Yamaha Clavinova CLP-311 Kullanıcı El Kitabı - Sayfa 17
Müzik Enstrümanı Yamaha Clavinova CLP-311 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha Clavinova CLP-311 28 sayfaları. Yamaha piano owner's manual
Ayrıca Yamaha Clavinova CLP-311 için: (Fransızca) Mode D'emploi (29 sayfalar)
Sayfayı Yazdır
Using the Recorder
RECORDER
START/
REC
STOP
RECORDER
START/
REC
MIDI/TRANSPOSE
STOP
12
Changing the Initial Settings
The initial voice (including dual mode), damper pedal, soft pedal,
and tempo settings made in step 2 of the recording procedure are
actually recorded by the CLP-311. These initial settings can be changed
after the recording is finished by pressing the [REC] button to engage
the record ready mode, making the required changes, and then pressing
the [REC] button again to exit from the record ready mode and register
the changes. If you do this, be careful not to press the [START/STOP]
button or a key on the keyboard, either of which will start recording and
erase all previous recorded data.
Erasing the recorded data
The recorded data can be erased by first pressing the [REC] button
to engage the record ready mode, and then pressing the [START/
STOP] button twice without recording any data.
Playback
To play back what you've recorded, simply press the RECORDER
[START/STOP] button. Playback starts from the beginning of the
recorded data, and will stop automatically at the end of the recorded
data. You can also stop playback at any time by pressing the [START/
STOP] button.
• It is possible to play along on the keyboard during playback.
NOTE
• The playback volume and tempo can be adjusted by using the [MASTER
VOLUME] and [TEMPO] controls, respectively.
• If the metronome is being used during playback, the metronome will stop
when playback is stopped.
• All recorder data will be erased when the CLP-311 power is turned off. It
is possible to store recorded data to an external MIDI storage device
such as the Yamaha DOU-10 Disk Orchestra Unit by using the Bulk
Dump function described on page 16.
• The playback data is not transmitted via the MIDI OUT connector.
Fast Forward Playback
When you want to locate a specific point in a recording you can
quickly move forward through the recording while monitoring the
sound by pressing the [REC] button while holding the [MIDI/TRANS-
POSE] button.
.............................................................
...................................................................
............................................................................