Yamaha Clavinova CLP-570 Kullanıcı El Kitabı - Sayfa 17
Müzik Enstrümanı Yamaha Clavinova CLP-570 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha Clavinova CLP-570 24 sayfaları. Clavinova
Ayrıca Yamaha Clavinova CLP-570 için: Kullanıcı El Kitabı (24 sayfalar), Kullanıcı El Kitabı (24 sayfalar), Kullanıcı El Kitabı (24 sayfalar)
Sayfayı Yazdır
* Keys C1 through D*2 on the keyboard are used to set the
MIDI transmit channel, and keys C3 through D#4 are used
to turn the ONMI mode OFF and set the MIDI receive channel
as shown in the illustration below. The E4 key sets the OMNI
receive mode and basic receive channel 1.
Note: When the power is initially turned ON, MIDI receive is set
to the OMNI mode and the transmit channel is set to 1.
MIDI FUNCTION CHART
CLP-670
CLP-570
—
Selector*
Local ON/OFF
Program Change ON/OFF
PIANO 2
E.PIANO
HARPSICHORD
Control Change ON/OFF
| E .
Multi-Timbre Mode
.
plit & Left Local OFF
HARPSICHORD
1| CELESTA
S
Split & Right Local OFF
|HARPSICHORD 2| VIBES
Panel Data Transmit
JCELESTA
GUITAR
* The MIDI
functions listed above are engaged by holding
down the TRANSPOSER/MIDI
button and pressing the cor-
responding voice selector. Full details are given in the follow-
ing pages.
Local Control ON/OFF
"Local Control" refers to the fact that, normally, the Clavinova
keyboard
controls
its internal
tone
generator,
allowing
the
internal voices to be played directly from the keyboard. This
situation is "Local Control ON" since the internal tone generator
is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the Clavinova
keyboard does not play the internal voices, but the appropriate
MIDI
information
is still transmitted
via the MIDI
OUT
connector when notes are played on the keyboard. At the same
time, the internal tone generator responds to MIDI information
received via the MIDI IN connector. This means that while an
external MIDI sequence recorder such as the Yamaha EMQ-1
: Memory Box, for example, plays the Clavinova's internal voices,
an external tone generator such as the EMT-1
can be played
from the Clavinova keyboard.
EMT-1 FM Sound Box
(played from Clavinova
keyboard)
LAN
Clavinova
{Local Control OFF, played from EMQ-1
Memory Box}
Turning Local Control ON or OFF
1. Hold down the TRANSPOSER/MIDI button.
2. Press the PIANO 1 voice selector. If the PIANO
1 LED is
lit when the PIANO
1 voice selector is pressed, you have
turned local control OFF.
If the PIANO
1 LED is not lit
when the PIANO 1 voice selector is pressed, you have turned
local control ON.
3. Release the TRANSPOSER/MIDI
button.
Program Change ON/OFF
Normally the Clavinova will respond to MIDI program change
numbers
received from an external keyboard or other MIDI
device, causing the correspondingly numbered Clavinova voice
to be selected. The Clavinova will normally also send a MIDI
program change number whenever one of its voices is selected,
causing the correspondingiy numbered voice or program to be
selected on the external MIDI device if the device is set up to
receive and respond to MIDI program change numbers.
This function makes it possible to cancel program change number
reception and transmission so that voices can be selected on
the Clavinova without affecting the external MIDI device, and
vice versa.
1. Hold down the TRANSPOSER/MIDI
button.
2. Press the PIANO 2 voice selector. If the PIANO 2 LED is
lit when the PIANO 2 voice selector is pressed, you have
turned program change reception/transmission OFF. If the
PIANO 2 LED is not lit when the PIANO 2 voice selector
is pressed, you have turned program change reception/trans-
mission ON.
3. Release the TRANSPOSER/MIDI
button.
Control Change ON/OFF
Normally the Clavinova will respond to MIDI control change
data received from an external MIDI device or keyboard, caus-
ing the selected Clavinova voice to be affected by pedal and
other ''control'' settings received from the controlling device.
The Clavinova also transmits MIDI control change information
when either of its pedals are operated.
This function makes it possible to cancel control change data
reception and transmission if you do not want the Clavinova
voices to be affected by control change data received from an
external device or vice versa.
1. Hold down the TRANSPOSER/MIDI
button.
2. Press the E.PIANO
1 (E.PIANO
on the CLP-570)
voice
selector. If the E.PIANO
1 (E.PIANO) LED is lit when the
E.PIANO
1 (E.PIANO) voice selector is pressed, you have
turned control change reception/transmission OFF. If the
E.PIANO 1 (E.PIANO) LED is not lit when the E.PIANO 1
(E.PIANO) voice selector is pressed, you have turned control
change reception/transmission ON.
3. Release the TRANSPOSER/MIDI
button.
The Multi-Timbre Mode
The Multi-Timbre mode is a special mode in which the Clavinova
voices can be independently controlled on different MIDI chan-
nel numbers (1 through 10) by an external MIDI device such as
the Yamaha EMQ-1 Memory Box. The Multi-Timbre mode can
be activated as follows:
1. Hold down the TRANSPOSER/MIDI
button.
2. Press the E. PIANO 2 (HARPSICHORD
on the CLP-570)
voice selector. If the E. PIANO 2 (HARPSICHORD) LED
is lit when the E. PIANO 2 (HARPSICHORD) voice selector
is pressed, you have turned the Multi-Timbre mode ON. If
the E. PIANO 2 (HARPSICHORD) LED is not lit when the
E. PIANO
2 (HARPSICHORD)
voice selector is pressed,
you have turned the Multi-Timbre mode OFF.
3. Release the TRANSPOSER/MIDI
button.
Here's an example of how you could use the Multi-Timbre mode
to record three different parts on the EMQ-1 Memory Box that
will play different voices on the Clavinova when played back.
1. Connect the EMQ-1 to the Clavinova as shown below.
TIITTTTI
Clavinova
EMO-1 Memory Box
15