Yamaha Clavinova CVP-206 Kurulum Kılavuzu - Sayfa 8
Müzik Enstrümanı Yamaha Clavinova CVP-206 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Yamaha Clavinova CVP-206 17 sayfaları. Acrobat reader/file utility/yamaha usb midi driver
Ayrıca Yamaha Clavinova CVP-206 için: Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
For Macintosh Users
Depending on the Macintosh and operating system version
that you are using, the included studio setup file for the MIDI
instrument still may not work even after you have performed
the above steps. (MIDI transmission and reception will not be
possible even if the setup is valid.)
In this case, use the following procedure to re-create the setup
file.
1
Connect the MIDI instrument and Macintosh via USB
cable, and turn on the power of the MIDI instrument.
2
Start up OMS Setup, and from the "File" menu, choose
"New setup."
3
The OMS driver search dialog box will appear.
Uncheck both [Modem] and [Printer] if you are using a
USB connection.
4
Click the [Find] button to search for the device.
When a device has been found, the OMS Driver Setting
dialog box will display "USB-MIDI."
• If the device was found correctly, click the [OK]
button to proceed.
• If the device was not found, re-check that the cable
connections are correct, and repeat the procedure
from step #1.
5
Make sure that the port is shown below the device that
was found. (This will be a name such as USB-MIDI.)
Check the check box for the port, and then click the
[OK] button.
6
A dialog box will appear, allowing you to name the file
that will be saved. Input the desired filename, and click
[Save].
This completes the OMS setup.
7
From the "Studio" menu, choose "Test," and click the
port icon.
If a channel sounds on the MIDI instrument, the system
is operating correctly.
For details on using OMS, refer to "OMS_***_Mac.pdf,"
included with OMS.
8
Acrobat Reader/File Utility/YAMAHA USB MIDI Driver INSTALLATION GUIDE