Yamaha Clavinova CVP-208 Kurulum Kılavuzu - Sayfa 5
Müzik Enstrümanı Yamaha Clavinova CVP-208 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Yamaha Clavinova CVP-208 17 sayfaları. Acrobat reader/file utility/yamaha usb midi driver
Ayrıca Yamaha Clavinova CVP-208 için: Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Installing the driver on a Windows XP system
1
Start the computer.
2
Select [Start]
[Control Panel].
If the control panel appears as shown below, click "Switch to
Classic View" in the upper left of the window.
All control panels and icons will be displayed.
3
Go to [System]
[Hardware]
Signature Verification], and check the radio button to the left
of "Ignore -Install all files, regardless of file signature" and
click [OK].
4
Click the [OK] button to close System Properties, and then
click "X" in the upper right of the window to close the Con-
trol Panel.
5
Insert the included CD-ROM into the CD-ROM drive.
6
Make sure the POWER switch on the MIDI instrument is set
to OFF and use the USB cable to connect the USB terminal
of the computer (or the USB hub) to the USB terminal of the
MIDI instrument. When the MIDI instrument is turned on,
the computer automatically displays the "Found New Hard-
ware Wizard."
7
Check the radio button to the left of "Search for a suitable
driver for my device. (Recommended)." Click [Next].
The system starts the installation.
8
When the installation is complete, the system displays "Com-
pleting the Found New Hardware Wizard." Click [Finish].
• Some computers may take about ten seconds to show this screen
after the installation is complete.
9
Restart the computer.
The driver has been installed.
■ File Utility
Once you've installed these software programs, you can use your
computer to organize data saved to the User/FD/HD drive in the
MIDI instrument.
1
Double-click on the "FileUtil_" folder in the CD-ROM.
The file "setup.exe" will be displayed.
2
Double-click on the "setup.exe" file.
The MIDI instrument Tools setup dialog will be displayed.
[Driver Signing]
[File
Acrobat Reader/File Utility/YAMAHA USB MIDI Driver INSTALLATION GUIDE
3
Execute the installation by following the on-screen direc-
tions.
For details, refer to the on-line Help or the PDF owner's manual.
MIDI port setting
software as a stand-alone application)
Before setting the MIDI port on the File Utility, you should set the
MIDI port from the MIDI SETUP toolbar.
• When you start the File Utility as a plug-in application in the Open Plug-in
Technology compatible application, refer to the the PDF manual for the
respective software.
1
Start the File Utility.
2
Click the MIDI Setup button in the Toolbar called up via step
#1.
MIDI Setup button
3
In the MIDI Setup window called up via step #2, click the
[▼] button at the right end of each box and make the port set-
tings as shown.
• In order for MIDI ports to be available here, you'll need to select the rele-
vant MIDI port within File Utility. This is the port that will be used in the rel-
evant MIDI applications. For details on setting the MIDI port, refer to the
on-line manual of File Utility.
For Windows Users
(when starting the
5