Yamaha disklavier Mark III Series Gelişmiş Kullanım Kılavuzu - Sayfa 13
Müzik Enstrümanı Yamaha disklavier Mark III Series için çevrimiçi göz atın veya pdf Gelişmiş Kullanım Kılavuzu indirin. Yamaha disklavier Mark III Series 39 sayfaları. Playback models
Ayrıca Yamaha disklavier Mark III Series için: Bakım El Kitabı (50 sayfalar), Broşür ve Teknik Özellikler (20 sayfalar), Kullanım Kılavuzu (49 sayfalar)
Sayfayı Yazdır
Chapter 2
Chain Play — Playing Back
Memory Disks in a Group
The 16 Memory Disks of the Disklavier are numbered from 0 to 9 and A to F. You can specify and play
back one disk, or specify several disks to be played back sequentially. To play several disks, what you
actually do is form a group of Memory Disks. Grouping disks enables you to control multiple disks in
group units. For example, you may have your favorite classical music on disks number 0, 5, 7, and A. By
grouping these four disks under Grp1, all you need to do to play back all your classical songs is set
playback to Grp1. You do not need to make settings for the next disk after each disk has finished.
0
1
You can have up to 9 groups (1 to 9). Each group can contain a maximum of 16 Memory Disks freely
combined to suit your needs. A disk can be part of more than one group, and the content of a group can be
changed easily at any time.
Note: Floppy disks and CDs cannot be included in a group.
Registering a Group
1
Hold down [FUNC.] and press
[STANDBY / ON].
The setup menu appears.
2
3
4
5
6
7
Grp1
Grp2
Grp3
Grp6
Grp7
8
9
A
b
C
d
Grp4
Grp5
Grp8
Grp9
2
Press [>] until the c cursor is next
to the Chain Play option, then
press [ENTER].
A display similar to the following appears.
3
Use the [–/NO] and [+/YES]
buttons to select a group number.
E
F
9