Yamaha Disklavier Mark III series DGC1B Gelişmiş Kullanım Kılavuzu - Sayfa 34
Müzik Enstrümanı Yamaha Disklavier Mark III series DGC1B için çevrimiçi göz atın veya pdf Gelişmiş Kullanım Kılavuzu indirin. Yamaha Disklavier Mark III series DGC1B 39 sayfaları. Dgc1b
Sayfayı Yazdır
☛ You can title your new recording either now
or after recording. See "Song Titling and
Title Editing" on page 22.
☛ If you want to record your L/R song using
the metronome, see "Recording with the
Metronome" on page 24.
☛ If you want to record a pedal count-in, see
"Recording a Pedal Count-In" on page 34.
3
Press a [PART] button to select the
part that you want to record first.
This function will record the left-hand part
first, unless you specify otherwise.
To record the right-hand part first, press
[PART L] to unselect the left-hand part,
then press [PART R].
☛ For existing songs, you must select the
track. See "Recording Ensemble Tracks" on
page 37.
The PART indicator of the selected part
lights red.
4
Press [PLAY/PAUSE].
The PLAY/PAUSE indicator stops flashing,
and the following display appears.
This Disklavier is now ready for you to
play the first part.
5
Recording begins when you start
playing.
As soon as you play the keyboard or press a
pedal, recording starts.
30
6
When you finish playing the first
part, press [STOP].
The first L/R part is saved to disk.
Recording the Second Part
1
Press [REC] to engage the Record
Standby mode.
The REC indicator lights and the
PLAY/PAUSE indicator flashes.
2
Press [SONG SELECT
the song number of the previous
recording.
A new song number is always created for a
new recording. Therefore, you must return
to the previous song number when
recording the second part of an L/R song.
☛ If you want to change the song's tempo
before recording the second part, see
"Changing the Default Song Tempo" on
page 26.
3
Press a [PART] button to select the
next part for recording.
The PART indicator of the selected part
lights red.
☛ If you do not want to monitor the first part
or you want to re-record the pedal part, see
step 4 of "Re-Recording One Part" on page
33.
4
Press [PLAY/PAUSE] to start
recording.
Playback of the first part starts
immediately, so be sure that you are ready
to play the second part along with it.
] to select