Yamaha DM 2000 Version 2 Kullanıcı El Kitabı - Sayfa 9

Müzik Enstrümanı Yamaha DM 2000 Version 2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha DM 2000 Version 2 37 sayfaları. Version 2
Ayrıca Yamaha DM 2000 Version 2 için: Kullanıcı El Kitabı (44 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kurulum Kılavuzu (14 sayfalar), Kurulum Kılavuzu (22 sayfalar), Yazılım Kurulum Kılavuzu (13 sayfalar), Kullanıcı El Kitabı (1 sayfalar), Tamamlayıcı Kılavuz (4 sayfalar), Kurulum Kılavuzu (35 sayfalar), Oryantasyon Kılavuzu (8 sayfalar), Yedeklilik Kılavuzu (8 sayfalar), Kullanıcı El Kitabı (3 sayfalar), (Almanca) İşletim sistemi kurulum kılavuzu (13 sayfalar)

Sayfayı Yazdır
Yamaha DM 2000 Version 2 Kullanıcı El Kitabı
P
Delay parameter
This parameter is used to set the delay time of the Delay function. Delay times can be set by
dragging.
Q
Channel number
This is the channel number.
R
AUX section
These controls are used to set the levels of the Aux Sends. To set an Aux Send level,
drag its bar or click a point along the length of the bar. To turn an Aux Send on or
off, click its number.
The following table shows how the Aux Send controls appear depending on the
Aux Send On/Off and Pre/Post settings. Aux Sends can be set to pre-fader or
post-fader on the Selected Channel window (see "AUX SEND section" on
page 11).
Aux Send status
On or off but no level set
Off, pre-fader
On, pre-fader
Off, post-fader
On, post-fader
S
Pan/Aux Send display
This display shows the stereo or surround pan position or, while setting an Aux Send, the
Aux Send level in dB.
T
PAN control
This control is used to set the Input Channel's stereo or surround pan position. When the
PAN CONTROL in the Master Section is set to "STEREO," the Pan control appears as a
rotary control, and when set to "SURR," the control appears as dot on a pan graph. The sur-
round pan position can be set by dragging the dot. If you click on the pan graph while hold-
ing down the Shift key, the pan immediately jumps to the new position.
U
LFE control
When 5.1 Surround mode is selected, this control is used to set the surround
LFE Channel level. It appears when the PAN CONTROL in the Master Section
is set to "SURR." To set the LFE level, drag the end of its bar or click a point along
the length of the bar.
V
AUTO button
This button displays the Automix status of the Input Channel.
W
SELECT button
This button is used to select the Input Channel.
X
SOLO button
This button solos the Input Channel. It appears orange while the channel is soloed.
Y
ON button
This button turns the Input Channel on and off. It appears orange while the channel is on.
Z
Short channel name
This is the channel's short name. To edit the name, click it and type.
a

Channel fader

This is the Input Channel's fader.
b
Channel meter
This meter displays the signal level of the Input Channel.
Input Channels
Appearance
Dark blue bar
Green bar outline displays level
Green bar displays level
Orange bar outline displays level
Orange bar displays level
Studio Manager for DM2000 V1.1—Owner's Manual
6