Yamaha DME32 Kullanıcı El Kitabı - Sayfa 4
Müzik Enstrümanı Yamaha DME32 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha DME32 16 sayfaları. Digital mixing engine
Ayrıca Yamaha DME32 için: Donanım Kurulum Kılavuzu (12 sayfalar)
Sayfayı Yazdır
4
Stereo PEQ & GEQ Components
The five new stereo PEQ (parametric equalizer) and three new stereo GEQ (graphic
equalizer) components make it easier to process stereo signals. Essentially these are ste-
reo versions of the existing EQ components.
PEQ
The five stereo PEQ components are shown below.
Each stereo PEQ component features two inputs and two outputs.
Each PEQ control window features an EQ graph and INPUT, EQ BAND, and OUT-
PUT sections. Since the only difference between all the stereo PEQ components is the
number of bands, only the stereo 4 BAND PEQ control window is shown here.
The parameter ranges for the stereo PEQ components are as follows.
Section
ON/OFF
INPUT
EQ BAND
OUTPUT
MUTE
1. Top and bottom bands only.
DME32—Owner's Manual Supplement
Parameter
Range
ON/OFF
LEVEL
Mute to 0.0 dB
PHASE
NOR/REV
Q
10–0.10
F
20.0 Hz–20.0 kHz
G
–15 dB to +15 dB
ON/OFF
ON/OFF
Peaking/L.Shelf or
1
Type
H.Shelf
LEVEL
Mute to 0.0 dB
ON/OFF
Description
Turns the component on and off
Adjusts the input signal level
Inverts the input signal
Adjusts the selectivity of each band
Adjusts the frequency of each band
Adjusts the gain of each band
Turns each band on and off
Sets the filter type for the band
Adjusts the output signal level
Mutes the output