21: BREATH RANGE, AMPLITUDE
AMPLITUDE
This function is used to set the maximum depth of the LFO amplitude modulation
that can be applied by using the Breath Controller. It works exactly like the previous
instructions for setting the LFO pitch modulation (20: BREATH
RANGE, PITCH)
except that this function affects amplitude.
22: BREATH RANGE, PITCH BIAS
ES
PITCH
BIAS
This function uses the breath pressure applied to the BC-1
Breath Controller to
directly control the pitch of the voice. In other words, the LFO has no effect. Only
your breath pressure directly affects the pitch of the voice.
The data range is from O to 99. At 50, pitch bias is OFF. A setting of 99 will allow
the Breath Controller to raise the pitch 4-octaves, and a setting of O will allow it
to lower the pitch 4-octaves.
Data is entered using the DATA ENTRY slider and —1/+1 buttons. Once this function
is called, subsequent presses of button #22 will increment the data value.
23: BREATH RANGE, EG BIAS
EG BIAS
This function uses the breath pressure applied to the BC-1
Breath Controller to
directly control the amplitude or timbre of the voice, according to settings of the
corresponding voice parameters which will be covered in CHAPTER IV. The LFO
has no effect—only your breath pressure directly affects the amplitude or timbre
of the voice.
|
‚
The data range is from 0 to 99. At 0, EG bias is OFF. A setting of 99 allows the
greatest amplitude or timbre variation to be produced by the Breath Controller.
Data is entered by using the DATA ENTRY slider and —1/+1
buttons. Once this
function is called, subsequent presses of button #23 will increment the data value.
24: VOICE NAME
[651
VOICE NAME
CURSORP
This function moves the LCD cursor from left to right, allowing you to name any
new voice or sound you have created before storing it. When button #24 is pressed,
the cursor flashes over the first letter in the name of the voice presently occupying
а space in the INTERNAL
memory. The DATA
ENTRY slider or -1/-1
buttons
are used to move through the selectable characters (A to Z) and symbols, while
subsequent presses of the the VOICE NAME CURSOR button will move the LCD
cursor to the immediate right.
VOICE NAME CHARACTERS
SPACE
! " Z$96&'
()
ж+,
– . 00123456789
201€
=O
?PAABCDEFGHIJSKLMNOPOQRSTU
VWXYZC¥}*_*abcdetghijkimnopa
rStuvwxyzll!]|
-፦
Sayfayı Yazdır