DirectConnect DC-S-24M Kullanıcı Kılavuzu - Sayfa 8
Anahtar DirectConnect DC-S-24M için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DirectConnect DC-S-24M 9 sayfaları. 24-port gigabit ethernet unmanaged switch
Sayfayı Yazdır
2
Installing and Connecting the Switch
This part describes how to install your Ethernet Switch and make connections to it. Please read the following topics and
perform the procedures in the order being presented.
2.1 Installation
Please follow the following instructions in avoid of incorrect installation causing device damage and security threat.
Put the Switch on stable place or desktop in case of falling damage.
Make sure the Switch works in the proper AC input range and matches the voltage labeled on the Switch.
To keep the Switch free from shorts, do not open the Switch's shell even in power failure.
Make sure that there is proper heat dissipation from and adequate ventilation around the Switch.
Make sure the cabinet's weight capacity is enough for the weight of the Switch and its accessories.
2.1.1 Desktop Installation
When installing the Switch on a desktop, please attach these cushioning rubber feet provided on the bottom at each
corner of the Switch in case of the external vibration. Allow adequate space for ventilation between the device and the
objects around it.
2.1.2 Rack-mountable Installation in 19-inch Cabinet
The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed in a wiring closet with other
equipment. To install the Switch, please follow these steps:
a.
Attach the mounting brackets on the Switch's side panels (one on each side) and secure them with the screws
provided.
b.
Use the screws provided with the equipment rack to mount the Switch on the rack and tighten it.
Figure 2-1 - Bracket Installation
5
24-Port Gigabit Ethernet Unmanaged Switch