Yamaha SILENT Bass SLB300 PRO Kullanıcı El Kitabı - Sayfa 12

Müzik Enstrümanı Yamaha SILENT Bass SLB300 PRO için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha SILENT Bass SLB300 PRO 24 sayfaları.

Sayfayı Yazdır

i [MIC TYPE] button

This selects the type of microphone to be simulated in the SRT POWERED system. Press and

hold the microphone type switching button (BLEND knob) until the status display LED flashes to

change the microphone type. The microphone type switches in order as follows: microphone type

1  microphone type 2  microphone type 3  microphone type 1. If you press the button

quickly, you can check the microphone type currently selected from the number of flashes.

 Microphone type 1: Rich

Well-balanced, rich sound from a classic vintage vacuum-tube microphone.

 Microphone type 2: Simple

Clear, clean sound from a dynamic microphone.

 Microphone type 3: Warm

Warm sound with low-frequency emphasis from a famous vacuum-tube microphone, different

from type 1.

SLB300 PRO SLB300 Owner's Manual

y[BYPASS] button

This button bypasses all controls except for the [VOL-

UME] of the SRT POWERED preamplifier. You can use

this button to instantly switch between the processed

SRT POWERED sound and the dry signal output. While

the bypass function is enabled, the LED for e is lit up in

green.

NOTE

• If you want to output the dry sound while still in active

output, use the bypass function with the power switch

on.

u[BLEND] knob

This adjusts the amount of mixing between the signal

from the pickup and the simulated microphone signal.

Turn it all the way to the left to set the signal from the

pickup to 100%. Turn it all the way to the right to set the

simulated microphone signal to 100%.