Yamaha Silent SLG110N Kullanıcı El Kitabı - Sayfa 7
Müzik Enstrümanı Yamaha Silent SLG110N için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha Silent SLG110N 14 sayfaları. Silent guitar
Ayrıca Yamaha Silent SLG110N için: Kullanıcı Kılavuzu (11 sayfalar), Kullanıcı El Kitabı (15 sayfalar)
When shipped from the factory, the left frame is not attached to the Silent Guitar's
main body.
Before using the instrument, please properly attach the left frame using the proce-
dure described below.
1.
Fully loosen [frame attachment screw 1] located in the
th
area behind the 12
located at the end of the Silent Guitar's main body.
2.
Insert the lower rod of the left frame fully into the
bracket hole on the Silent Guitar's main body.
Next, insert the upper rod fully into the bracket hole.
•. Make. sure. that. the. upper. and. lower. ends. of. the. left.
frame.are.not.reversed..
•. Do. not. place. any. excess. force. on. the. frame's. rods..
The.rods.may.become.damaged.
3.
After confirming that both rods of the left frame are
fully inserted, turn the attachment screws clockwise and
secure the left frame to the Silent Guitar's main body.
• W h e n m o v i n g a n y m o v a b l e p a r t s ,
make sure that your fingers or hand do
not become pinched in the parts.
• Do not tighten the attachment screws
when the frame is removed. It will re-
sult in the damage of parts, which will
cause problems when re-attaching the
frame.
Attachment of the frame is now complete.
To remove the frame, simply reverse the order of the procedure described above, removing the upper
rod from tha main body before removing the lower rod.
•. After.the.frame.is.attached,.make.sure.attachment.screws.1.and.2.are.tightened.firmly..Using.the.instru-
ment.with.the.screws.loose.will.result.in.rattle.or.other.noise.during.performance.
•. When.transporting.the.instrument,.please.carry.the.instrument.by.its.neck.or.main.body..Holding.the.
instrument.by.only.its.left.or.right.frame.will.result.in.damage.of.the.frame.or.the.frame's.fixed.parts.
■.About.the.Strap.Pin
The frame attachment screw can be used as a strap pin for a separately purchased guitar strap.
•. Make. sure. that. the. strap. is. firmly. hooked. onto. the. strap. pin. so. the. instrument. does. not. drop. during.
performance.
Attaching the Frame
fret, and [frame attachment screw 2]
Frame attachment screw 1
w
Rod
q First, insert the
OPEN
lower rod into the
main body.
w Then, insert the
upper rod.
AUX VOL
MIN
MAX
AUX IN
LINE OUT
Rod
q
Frame attachment screw 2
7