Yamaha TP-3132EA Kullanıcı El Kitabı - Sayfa 9

Müzik Enstrümanı Yamaha TP-3132EA için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha TP-3132EA 11 sayfaları. Tp3100(ea) series pedal timpani

Sayfayı Yazdır

Loosen all over-tightened bolts according to the

procedure described in step

is approximately the same at each bolt, repeat-

edly depress the toe and heel of the pedal sev-

eral times.

Repeat steps

through

bolt is exactly the same.

Check the sound by striking the head as de-

scribed in step

• Sound is lower than the tuning note

→ Tune the instrument by tightening all tun-

ing bolts by an equal amount (max.

1/16 of a turn).

• Sound is higher than the tuning note

→ Tune the instrument by loosening all tun-

ing bolts by an equal amount (max.

1/16 of a turn) according to the procedure

described in step

Operate the pedal as described in step

pitch does not change, the instrument is tuned

properly.

(If the pitch changes, repeat from step

The instrument is now tuned to the lowest sound

(note) of its tonal range. Depress the toe of the

pedal to change to a higher pitch (note).

After tuning, perform ■ Pedal Adjustment and

then ■ Tuning Indicator Adjustment.

(*2). When the pitch

until the pitch at each

. If the

■ Pedal Adjustment

After depressing the toe and heel of the pedal, turn the

spring tension adjustment bolt as described below.

Spring Tension

Adjustment Bolt

• Heel moves up when releasing the foot from the

pedal after depressing the heel, or the heel feels

heavier than the toe.

→ Turn the spring tension adjustment bolt to the

left (counterclockwise).

• Toe moves up when releasing the foot from the

pedal after depressing the toe, or the toe feels

heavier than the heel

→ Turn the spring tension adjustment bolt to the

right (clockwise).

Use the supplied spring adjustment wrench to turn the

spring adjustment bolt. Do not turn too many full rota-

tions at once, and re-check the adjustment every 2 turns

by pressing the toe and heel of the pedal.

Caution

Never place your fingers or foot into the mov-

ing parts or the space under the pedal or base.

Serious injury can result if fingers or feet be-

come pinched.

Note

Do not loosen the spring tension ad-

justment bolt by more than 3 rotations

at a time, as the toe of the pedal tends

to drop abruptly after a specific point.

● Pedal balance spring mechanism

Your Yamaha timpani is equipped with a unique pedal

balance spring mechanism (a coil spring counteracting

the tension of the head) which allows you to freely

change the pitch (note) of the instrument. When the pedal

is moved, the pitch of the head will change, and the bal-

ance spring ensures that the pedal angle (pitch) will not

change when you remove your foot from the pedal.

Adjusting the Pitch