Yamaha YDP-101E Kullanıcı El Kitabı - Sayfa 18

Müzik Enstrümanı Yamaha YDP-101E için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha YDP-101E 48 sayfaları. Yamaha digital piano owner's manual

Sayfayı Yazdır

Touch Sensitivity

Four different types of keyboard touch sensitivity — HARD, MEDIUM, SOFT

or FIXED — can be selected to match different playing styles and preferences.

HARD

TOUCH

MEDIUM

SOFT

Transposition

The YDP-101's TRANSPOSE function makes it possible to shift the pitch of

the entire keyboard up or down in semitone intervals up to a maximum of 12

semitones (i.e. a maximum of one octave up or down). "Transposing" the pitch of

the YDP-101 keyboard facilitates playing in difficult key signatures, and you can

easily match the pitch of the keyboard to the range of a singer or other instru-

mentalist.

SONG

TRANSPOSE

SELECT

– /NO

YDP-101

To select a touch sensitivity type press the [TOUCH] button a few

times until the indicator corresponding to the desired type lights (the

indicators light in sequence each time the [TOUCH] button is pressed).

HARD

MEDIUM

SOFT

FIXED

NOTE

Use the [–/NO] or [+/YES] button while holding the [TRANS-

POSE] button to transpose down or up as required. The transposition

range is from "–12" (down one octave) through "0" (normal pitch) to

/YES

"12" (up one octave). The amount of transposition appears on the LED

display while the [TRANSPOSE] button is held. The default transpose

setting is "0".

NOTE

The HARD setting requires the keys to be played quite hard to

produce maximum loudness.

The MEDIUM setting produces a fairly "standard" keyboard response.

This is the initial factory default setting.

The SOFT setting allows maximum loudness to be produced with

relatively light key pressure.

(no indicator lit)

All notes are produced at the same volume no matter how hard the

keyboard is played.

When the FIXED type is selected, the volume of notes played in the

FIXED mode can be set by using the [–/NO] and [+/YES] buttons while

the [TOUCH] button is held (the current volume level appears on the

display). The volume range is from 1 through 127. The default setting

is 64.

• This setting does not change the weight of the keyboard.

• The touch sensitivity type and volume set in the FIXED mode will become

the common setting for all voices.

• The [TRANSPOSE] button indicator remains lit when a transpose setting

other than "0" is selected.

• Notes below and above the A-1 ... C7 range of the YDP-101 sound one

octave higher and lower, respectively.