Yamaha YDP-101E Kullanıcı El Kitabı - Sayfa 24
Müzik Enstrümanı Yamaha YDP-101E için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha YDP-101E 48 sayfaları. Yamaha digital piano owner's manual
Sayfayı Yazdır
The Function Mode
YDP-101 extraordinary versatility. The functions are categorized in groups as
follows:
TEMPO
FUNCTION
FUNCTION
TEMPO
FUNCTION
FUNCTION
G Operation Example
Press [+/YES]
Use FUNCTION [<], [>]
Press [–/NO] or [+/YES]
once
Use [–/NO], [+/YES]
24
YDP-101
The [FUNCTION] button provides access to a range of functions that give the
F1
Tuning ....................................................................... 25
F2
Scale ......................................................................... 25
F3
Dual Mode Functions .............................................. 26
F4
Left Pedal Mode ....................................................... 27
F5
Metronome Volume .................................................. 27
F6
Piano Song Part Cancel Volume............................. 27
F7
MIDI Functions ......................................................... 28
F8
Backup Functions ................................................... 31
To Select a Function ...
Z
Press the [FUNCTION] button so that its indicator lights.
NOTE
X
Use the FUNCTION [<] and [>] buttons to select the desired
function.
C
In the case of the Scale (F2), Dual Mode (F3), MIDI (F7), and
Backup (F8) functions, you will have to press the [+/YES] button
once to enter the respective sub-mode after the function has been
selected, and then use the FUNCTION [<] and [>] buttons again
to select the desired sub-function.
(sub-mode)
NOTE
V
Set the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
NOTE
B
Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
...........................................................................
• Functions cannot be selected during demo/piano song playback or when
the recorder is in operation.
• The Dual mode must be engaged before the F3 function can be selected.
If the Dual mode is not engaged, " F3. - " will appear on the display and the
Dual sub-mode will not be available.
• After selecting the function, the current setting will be displayed when the
[–/NO] or [+/YES] button is pressed for the first time.