Yamaha YDP-163WA Kullanıcı El Kitabı - Sayfa 29

Müzik Enstrümanı Yamaha YDP-163WA için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha YDP-163WA 36 sayfaları.

Appendix

Problem

Power suddenly and unexpectedly turns off.

The instrument does not turn on.

A click or pop is heard when the power is

turned on or off.

Noise is heard from the speakers or

headphones.

Noise is heard from the instrument's speakers or

headphones when using the instrument with the

application on iPhone/iPad.

The overall volume is low, or no sound is heard.

Pedals do not function.

The damper pedal does not function as

expected.

Possible Cause and Solution

This is normal and the Auto Power Off function may have been activated

(page 13). If desired, disable the Auto Power Off function.

The plugs are not properly connected. Make sure that the DC plug is

securely inserted into the DC IN jack on the instrument, and that the AC

plug is securely inserted to the AC outlet (page 12).

This is normal when electrical current is being applied to the instrument.

The noise may be due to interference caused by the use of a mobile phone

in close proximity to this instrument. Turn off the mobile phone, or move it

further away from this instrument.

When you use the instrument along with the application on your iPhone/

iPad, we recommend that you set "Airplane Mode" to "ON" on your iPhone/

iPad in order to avoid noise caused by communication. While Bluetooth is

connected, setting "Airplane Mode" to "ON" disconnects Bluetooth;

however, the connection can be restored by reconnecting again.

The Master Volume is set too low. Set it to an appropriate level using the

[MASTER VOLUME] knob (page 12).

Make sure a pair of headphones or conversion adaptor is not connected to

the [PHONES] jack (page 13).

Make sure that Local Control is On. For details, refer to the "MIDI

Reference" (page 9).

The pedal cord may not be securely connected to the [TO PEDAL] jack. Be

sure to insert the pedal cord all the way until the metal part of the cord plug

disappears from view (page 32).

The damper pedal was pressed when the power was turned on. This is not

a malfunction; release the pedal and press it again to reset the function.

YDP-163/YDP-143 Owner's Manual