Yamaha YG-2500 Kullanıcı El Kitabı - Sayfa 7
Müzik Enstrümanı Yamaha YG-2500 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha YG-2500 12 sayfaları. Concert glockenspiel
Ayrıca Yamaha YG-2500 için: Kullanıcı El Kitabı (13 sayfalar), Kullanıcı El Kitabı (13 sayfalar), Kullanıcı El Kitabı (13 sayfalar)
1-2
Position the pedal stay so the indentation is facing up, and insert the pedal stay all the way into the
receiver (low register side) on the leg (at this point, the wing bolt's end is aligned with the indenta-
tion on the pedal stay), then tighten the wing bolt to secure.
Attach the pedal stay assembly to the high register side in the same manner.
* Use the hole close to the indentation as a reference for aligning the pedal stay.
Wing bolt
Receiver
(low register side)
The illustration shows attachment of the pedal
stay to the low register side.
1-3
After confirming that both right and left legs are standing vertically, attach one end of the leg stay
that is attached to the pedal stay, onto the leg (low register side) using the wing nut located
between the two upright legs, and tighten the wing nut to secure.
* Slide the end of the stay firmly onto the bolt.
Pedal stay
Indentation
End of leg stay
Wing nut
Wing bolt
Use this hole for aligning
Pedal stay
Indentation
Leg
(low register side)
Leg
(low register side)
Leg stay
Assembly
21