Yamaha YM-4900A Kullanıcı El Kitabı - Sayfa 9

Müzik Enstrümanı Yamaha YM-4900A için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha YM-4900A 14 sayfaları. Concert marimbas
Ayrıca Yamaha YM-4900A için: Kullanıcı El Kitabı (12 sayfalar), Kullanıcı El Kitabı (16 sayfalar)

Sayfayı Yazdır

Insert the rails (2) and (3) into the end frames of the legs.

2-1. First, insert the rail (2).

A mark "B" is printed on the big end face of the rail (2) and the groove section of the end frame of the

big end leg.

* Do not insert one side of the rail all the way down first, but push both sides into grooves alternately little by

little until both sides are inserted fully and stop.

Next, in the same way, insert the rail (3) securely.

A mark "C" is printed on the big end face of the rail (3) and the groove section of the end frame of the

big end leg.

"B" mark on the rail

and end frame.

Large end

2-2. Engage the short rail clamp located at the center of the rail (3) with the rail (2).

* Release the clamp from its holder, lift and move it to the rail (2) and push it down fully.

"C" mark on the rail

and end frame.

Rail (2)

Rail clamp

Rail (3)

Rail clamp

ASSEMBLY

Rail (2)

Small end