Yamaha YOB-832L Kullanıcı El Kitabı - Sayfa 6

Müzik Enstrümanı Yamaha YOB-832L için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha YOB-832L 18 sayfaları. Oboe

Assembly and Tuning

Before assembling the instrument, please observe the following:

When holding and assembling the instrument, take care not to apply excessive force to the keys.

Applying excessive force may bend the keys, resulting in unbalanced adjustment.

When you assemble the instrument for the fi rst time, you may have diffi culty connecting the joints

due to tightness. In this case, apply a thin coat of the included cork grease to the joint cork, and try

again to connect the joints. If the joints still do not fi t together smoothly, apply a thin coat of cork

grease to the receiver side as well. When applying cork grease, be careful not to apply too much.

 Assembling the Oboe

Apply cork grease.

Before assembling the oboe, apply a thin coat

of cork grease to the joint cork and around the

lower part of the reed tube.

Attach the bell to the lower joint.

Hold the bell in your left hand and check the

position of the connection keys for the lower

joint and the bell. Slide the bell into the lower

joint.

Connect the upper and lower joints.

Hold the lower joint in your left hand and

check the position of the connection keys.

Slide the lower joint into the upper joint.

 Hints on Tuning the Oboe

Th e pitch of an oboe is aff ected by the length and

type of the reed tube, and the length, width, scrape

and gouge of the reed. If you have diffi culty tuning

the oboe, experiment and adjust these elements.

In addition, the temperature in the room and

inside the oboe aff ect the pitch of the instrument.

Before you start to tune, allow the instrument to

adjust to room temperature, or warm the instru-

ment by holding it in your hands.