Yamaha YVD10 Kullanıcı El Kitabı - Sayfa 7

Müzik Enstrümanı Yamaha YVD10 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha YVD10 11 sayfaları. Vibraphone variable-speed driver
Ayrıca Yamaha YVD10 için: Kullanıcı El Kitabı (11 sayfalar)

Sayfayı Yazdır

Connect the driver and the con-

troller.

Connect the driver cable to the driver

connection terminal on the control-

ler. Also, align the flat shape of the

connector of the cable with the

mark printed on the controller.

NOTICE

* Be careful not to break the pins of the cable.

* The driver connection terminal has a locking

function to prevent the cable from being inad-

vertently disconnected. To prevent damage

to the cables, be sure to firmly grip the metal

part of the plug when disconnecting the

cable.

 Controller

 Driver

Set the timing belt (fan belt).

4-1.First, wrap the belt around the

vibraphone (fan) pulley, and then

twist and hook the belt on the pul-

ley of the driver.

If the distance between pulleys is too wide

to fit the belt, first loosen the wing nut and

then adjust the tension of the belt. After

adjusting the tension, tighten the wing nut

firmly.

YVD20 YVD10 Owner's Manual

Metal part

Cable

 Fan side

Pulley

 Driver side

Timing belt

Pulley

(Fan belt)

 In the case of the YVD20

4-2.Lower the position of the driver

until the tension of the belt is suffi-

cient.

4-3.Prepare a separately sold AC

adaptor.

4-4.Connect the DC plug of the AC

adaptor to the power jack

(

Timing belt

(Fan belt)

Cup head square

neck bolt