Yamaha AVANTGRAND N3 Kullanıcı El Kitabı - Sayfa 41
Elektronik Klavye Yamaha AVANTGRAND N3 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha AVANTGRAND N3 49 sayfaları. Yamaha electronic keyboard user manual
Ayrıca Yamaha AVANTGRAND N3 için: Kullanıcı El Kitabı (49 sayfalar)
Sayfayı Yazdır
CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance
with the sequence given below.
• Assembly should be carried out by at least three persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument.
• Be sure to tighten all screws upon completing the assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
Have a Phillips-head (+) screwdriver of the
appropriate size ready.
1
Remove the parts and collect them
together for assembly.
1-1 Remove the parts shown below from the
smaller box.
Legs
Front (L)
Rear
Front (R)
Screws
x 4
Pedal brace rods
x 2
Cord holders
x 3
1-2 Set the larger box upright with the right side up.
1-3 Cut the bands.
1-4 Remove the covers.
N3: Assembling the Unit
Bolts
x 17
Pedal
AC power cord
Wrench
(Used to tighten bolts)
CAUTION
Do not lay the main unit
upside down on the
floor.
2
Attach and securely tighten the right front
leg and the rear leg with the bolts.
x 6
CAUTION
When the instrument is set upright (as in the illustration above),
take extra care not to keep the instrument from falling over, since
it is unstable in this position.
3
Set a blanket at the left corner.
Incorrect
x 5
41
N3/N2
•
Owner's Manual