Yamaha Clavinova CLP-110 Kullanıcı El Kitabı - Sayfa 26

Elektronik Klavye Yamaha Clavinova CLP-110 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha Clavinova CLP-110 46 sayfaları. Yamaha digital piano owner's manual
Ayrıca Yamaha Clavinova CLP-110 için: Hızlı Kullanım Kılavuzu (2 sayfalar), (Fransızca) Mode D'emploi (46 sayfalar), (Almanca) Kullanım kılavuzu (46 sayfalar)

Sayfayı Yazdır

Yamaha Clavinova CLP-110 Kullanıcı El Kitabı

MIDI Functions

You can make detailed adjustments to MIDI settings.

For more information about MIDI, see the "About MIDI" section (page 23).

MIDI Transmit/Receive Channel Selection

In any MIDI control setup, the MIDI channels of the transmitting and receiving equip-

ment must be matched for proper data transfer.

This parameter enables you to specify the channel on which the Clavinova transmits or

receives MIDI data.

Procedure

Setting the transmit channel

While holding down the A-1 and C 0 keys, press one of the C1–E2 keys.

Setting the receive channel

While holding down the A-1 and C 0 keys, press one of the C4–F5 keys.

A-1

C 0

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the CLP-110 keyboard controls its

internal tone generator, allowing the internal voices to be played directly from the key-

board. This situation is "Local Control On," since the internal tone generator is con-

trolled locally by its own keyboard.

Local control can be turned OFF, however, so that the CLP-110 keyboard does not play

the internal voices, but the appropriate MIDI information is still transmitted via the

MIDI OUT connector when notes are played on the keyboard. At the same time, the

internal tone generator responds to MIDI information received via the MIDI IN con-

nector.

Procedure

While holding down the A-1 and C 0 keys, press the C6 key.

A-1 C 0

MIDI Functions

CLP-110

D 2

2 4

7 9 11

14 16

1 3 5 6 8 10

12 13 15

For setting the

transmit channels.

(C1–D 2)

OFF

2 4

7 9 11

14 16

1 3 5 6 8 10

12 13 15 1+2

For setting the

receive channels.

(C4–F5)

For ALL mode

The highest

key

NOTE

Demo and preset song data are

not transmitted via MIDI.

NOTE

In Dual mode, Voice 1 data is

transmitted on its speciﬁed

channel and Voice 2 data is

transmitted on the next greater

channel number relative to the

speciﬁed channel. In this mode,

no data is transmitted if the

transmit channel is set to "OFF."

TIP

ALL:

A "Multi-timbre" Receive mode

is available. It allows simulta-

neous reception of different

parts on all 16 MIDI channels,

enabling the Clavinova to play

multi-channel song data

received from a music computer

or sequencer.

1+2:

A "1+2" Receive mode is avail-

able. It allows simultaneous

reception on channels 1 and 2

only, enabling the Clavinova to

play 1 and 2 channel song data

received from a music computer

or sequencer.

TIP

Program change and other like

channel messages received will

not affect the CLP-110's panel

settings or the notes you play

on the keyboard.

NOTE

The Clavinova does not receive

MIDI data when it is in Demo or

Preset Song mode.