Yamaha MOTIF ES6 Yazılım Kılavuzu - Sayfa 31

Elektronik Klavye Yamaha MOTIF ES6 için çevrimiçi göz atın veya pdf Yazılım Kılavuzu indirin. Yamaha MOTIF ES6 36 sayfaları. Voice editor
Ayrıca Yamaha MOTIF ES6 için: Yazılım Kurulum Kılavuzu (35 sayfalar), Yazılım Kılavuzu (33 sayfalar)

Sayfayı Yazdır

"Transmit Dialog"

Voice data can be transmitted in bulk to your synthesizer. Select the bulk voice data you wish to

receive, then click [Start]. The progress bar shows how much of the data has been transmitted.

Finally, click the [Close] button to quit the dialog.

When transmitting user voice data to the MOTIF ES6/7/8, user voice data in the MOTIF ES6/7/8 will

be overwritten. Exercise caution so as not to accidentally overwrite a User voice that you have used in

another Multi conﬁguration.

When the User Voice of any given part is already selected, transmit the Multi settings to the MOTIF

ES6/7/8 after you bulk transmit the User Voice data. By transmitting the Multi settings you can play the

MOTIF ES6/7/8 the newly transmitted voice data.

Transmission time can be set under "Dump Interval" on the "Setup dialog"

1 Transmit Type .................. Click this and select which user voice data to transmit to the MOTIF

Normal User 1+2+Drum ......... All Normal User voices and Drum voices

Normal User 1 ........................ All Normal User 1 voices

Normal User 2 ........................ All Normal User 2 voices

Normal User 1+2 .................... All Normal User voices

Drum User .............................. All Drum User voices

Voice data for optional plug-in boards can not be transmitted.

2 Progress Bar ................... Indicates how much of the data has been transmitted.

3 Start ................................ Click this to begin the transmission. Once transmission has started,

4 Close............................... Click this to close this dialog.

The MIDI Device Number has to be set correctly in order to transmit bulk data. For further details, see

page

30.

ES6/7/8.

this button changes to a [Stop] button. Clicking [Stop] will stop the

transmission.

(page

30).