Yamaha PSR-E253 Kullanıcı El Kitabı - Sayfa 13

Elektronik Klavye Yamaha PSR-E253 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha PSR-E253 48 sayfaları.

Sayfayı Yazdır

 Setting the battery type

After installing new batteries and turning the power

on, make sure to set the Battery Type appropriately

(rechargeable or not) via Function number 023 (page

31).

NOTICE

• Failure to set the Battery Type may shorten the amount of

the battery life. Make sure to set the Battery Type correctly.

Using the music rest

Connecting Headphones (sold

separately) or External Audio

Equipment

1/4" stereo

phone plug

A pair of stereo headphones with a 1/4" stereo phone

plug can be plugged in here for convenient monitor-

ing. The speakers are automatically shut off when a

plug is inserted into this jack.

The [PHONES/OUTPUT] jack also functions as an

external output. You can connect the [PHONES/

OUTPUT] jack to a computer, a keyboard amplifier,

stereo system, mixer, recorder, or other line-level

audio device to send the instrument's output signal to

that device.

CAUTION

• Do not use the instrument/device or headphones for a long

period of time at a high or uncomfortable volume level,

since this can cause permanent hearing loss. If you experi-

ence any hearing loss or ringing in the ears, consult a phy-

sician.

• Before connecting the instrument to other electronic com-

ponents, set all volume levels to the minimum, then turn

off the power for all components.

Insert the music rest

into the slots as shown.

NOTICE

• When the instrument's sound is output to an external

device, first turn on the power to the instrument, then to

the external device. Reverse this order when you turn the

power off.

Connecting a Footswitch to the

[SUSTAIN] jack

You can produce a natural sustain as you play by

pressing a Footswitch (FC5/FC4A; sold separately)

plugged into the [SUSTAIN] jack.

NOTE

• Make sure that the footswitch plug is properly connected to

the [SUSTAIN] jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

• The sustain function does not affect style (automatic accom-

paniment; page 18).

Turning the Power On/Off

Turn down the [MASTER VOLUME] dial to "MIN."

Press the [

] (Standby/On) switch to turn on the

power. While playing the keyboard, adjust the

[MASTER VOLUME] dial. To turn off the power,

press the [

] (Standby/On) switch again for a

second.

CAUTION

• When using an AC adaptor, even when the power is off, a

small amount of electricity is still being consumed by the

instrument. When you are not using the instrument for a

long time, make sure to unplug the AC adaptor from the

wall AC outlet.

PSR-E253/YPT-255 Owner's Manual

Setting Up