Yamaha PSR-E360 Kullanıcı El Kitabı - Sayfa 13

Elektronik Klavye Yamaha PSR-E360 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha PSR-E360 44 sayfaları.
Ayrıca Yamaha PSR-E360 için: Kullanıcı El Kitabı (25 sayfalar)

Sayfayı Yazdır

NOTE

• This instrument cannot charge the batteries. Use only the specified charger device when charg-

ing.

• Power will be automatically drawn from the AC adaptor if an AC adaptor is connected while bat-

teries are installed in the instrument.

Setting the battery type

Depending on the battery type to be used, you may need to change the battery

type setting on this instrument. Alkaline (and manganese) batteries are chosen

by default. After installing new batteries and turning the power on, make sure to

set the Battery Type appropriately (rechargeable or not) via Function number

022 (page 33).

NOTICE

• Failure to set the battery type may shorten the amount of the battery life. Make sure to set

the battery type correctly.

Turning the Power On

Turn down the [MASTER VOLUME] dial to

"MIN" .

Press the [

] (Standby/On) switch to turn

the power on.

The Voice name appears on the display.

Adjust the volume as desired while playing

the keyboard.

Press and hold the [

] (Standby/On) switch for about a second to set the

instrument to standby mode.

CAUTION

• Even when the [

] (Standby/On) switch is in standby status, electricity is still flowing to

the product at the minimum level. Remove the electric plug from the outlet when the

instrument is not to be used for extended periods of time, or during electrical storms.

• Do not use the instrument for a long period of time at a high or uncomfortable volume

level, since this can cause permanent hearing loss.

NOTICE

• Press only the [

] (Standby/On) switch when turning the power on. Any other operations

such as pressing the pedal are not allowed. Doing so may cause the instrument to mal-

function.

Setting the Auto Power Off function

To prevent unnecessary power consumption, this instrument features an Auto

Power Off function that automatically turns the power off if the instrument is not

operated for a specified period of time. The amount of time that elapses before

the power is automatically turned off is 30 minutes by default; however, you can

change the setting.

To set the time that elapses before Auto Power Off is exe-

cuted:

Press the [FUNCTION] button several times until "AutoOff" (Function 021;

page 33) appears, then use the [+] or [-] button to select the desired value.

Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes)

Default value: 30 (minutes)

To disable the Auto Power Off function:

Turn the power on while holding down

the lowest key on the keyboard. A mes-

sage "oFF AutoOff" appears briefly, then

the instrument starts up with the Auto

Power Off function disabled. The Auto

Power Off function also can be disabled

by selecting Off in Function number 021 (page 33).

NOTICE

• Depending on the instrument status, the power may not turn off automatically, even after

the elapse of the specified period of time. Always turn off the power manually when the

instrument is not in use.

• When the instrument is not operated for a specified period of time while connected to an

external device such as an amplifier, speaker or computer, make sure to follow the instruc-

tions in the Owner's Manual to turn off the power to the instrument and the connected

devices, in order to protect the devices from damage. If you do not want the power to turn

off automatically when a device is connected, disable Auto Power Off.

NOTE

• Generally, the data and settings are maintained even when the power is turned off with the Auto

Power Off function. For details, see page 31.

Setting Up

PSR-E360 Owner's Manual