Yamaha PSR-E373 Servis Kılavuzu - Sayfa 10
Elektronik Klavye Yamaha PSR-E373 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Yamaha PSR-E373 44 sayfaları.
Sayfayı YazdırPSR-E373/YPT-370
2.
DMLCD Circuit Board (Time required: About 6 minutes)
1.
Remove the lower case assembly. (See procedure 1)
2.
Remove the 12 screws [380A]. The DMLCD circuit board can then be removed. (Fig.2)
*
When installing the DMLCD circuit board, tighten the screws 1 through 2 in numerical order. (Fig.2)
*
After replacing the DMLCD circuit board, execute "Factory Reset" in the Test program.
底面図
Bottom view
3.
LCD (Time required: About 7 minutes)
1.
Remove the lower case assembly. (See procedure 1)
2.
Remove the DMLCD circuit board. (See procedure 2)
3.
Remove the back light assembly. (Fig.3)
4.
Remove the rubber connector. (Fig.3)
5.
Remove the LCD display. (Fig.3)
*
Avoid touching the conductive part of the rubber connector as much as possible. Should foreign matter or dirt adhere,
remove such contamination using adhesive tape or the like. Do not wipe off using solvents such as benzene or alcohol.
(Fig.3)
10
PNL
[380C]
[380D] [380D]
MVR
[370]
[380D]
[380B]
DC-IN
DMLCD
DMLCD
[380A]
[380A]
[380E]
1
2
[380D]
[380A]
[380A]
[380E] [380E]
x2
Fig.2
液晶ディスプレイ
LCD display
バックライトAss'y
BACK LIGHT ASSEMBLY
ゴムコネクター
RUBBER CONNECTOR
Fig.3
PNR
[380E]
[370]