Yamaha YDP-C71PE Kullanıcı El Kitabı - Sayfa 22

Elektronik Klavye Yamaha YDP-C71PE için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha YDP-C71PE 38 sayfaları. Owner's manual

Sayfayı Yazdır

Advanced Functions

Recording Your Performance

This instrument lets you record your keyboard performance as a User Song. Up to two Parts (Left-hand and Right-hand)

can be recorded separately.

Recording Your Performance

Select the desired Voice and other parameters, such as beat,

for recording.

For instructions on selecting a Voice, refer to page 15. If necessary, set other

parameters, such as beat and effects, in this step.

While holding down [REC], press [+ R] or [– L] to engage

Record Ready mode for the Part you want to record.

If you do not intend to record right- and left-hand Parts separately, record the entire

performance to either Part.

Recording the right-hand Part ([+ R])

Recording the left-hand Part ([– L])

After a while, the [REC] lamp and the selected Part lamp will flash at the current

tempo.

To exit from Record Ready mode:

Press only the [REC].

If data has already been recorded to the other Part:

The data in this Part will be played back while recording. This Part can be turned off

or on by holding down [PLAY] then pressing this Part button.

Play the keyboard or press [PLAY] to start recording.

The [REC] lamp lights up while the Recording Part lamp flashes at the current

tempo.

Press either [REC] or [PLAY] to stop recording.

The [REC], [PLAY], [+ R] and [– L] lamps flash, indicating that the recorded data

is being stored. After the Save operation is completed, the lamps will turn off,

indicating that the Record operation has been completed.

YDP-C71 Owner's Manual

NOTE

You can use the Metronome

while recording; however, the

Metronome sound will not be

recorded.

NOTICE

If a Part contains data, the

Part lamp lights. Note that the

Recording operation will

replace already-recorded data

with the new data.

NOTICE

Never turn off the power while

the recorded data is being

stored (while the lamps are

flashing). Otherwise, all

recorded data will be lost.