Yamaha AVENTAGE RX-A1040 Hızlı Kılavuz - Sayfa 3
Alıcı Yamaha AVENTAGE RX-A1040 için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Yamaha AVENTAGE RX-A1040 4 sayfaları. Av receiver
Ayrıca Yamaha AVENTAGE RX-A1040 için: Kurulum Kılavuzu (2 sayfalar), Kolay Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
■ Zone2 setup
Use the supplied remote control to set the Zone2
function.
1
Turn on the unit and TV.
2
Switch the TV input to display video from
the unit.
3
Press ON SCREEN to display the
on-screen menu on the TV.
ON SCREEN
TOP MENU
TOP MENU
POP-UP/MENU
POP-UP/MENU
ON
SCREEN
OPTION
OPTION
Cursor keys
ENTER
ENTER
RETURN
RETURN
DISPLAY
DISPLAY
4
Use the cursor keys and ENTER to select
"Setup" → "Speaker" → "Manual Setup" →
"Power Amp Assign".
5
Use the cursor keys to select
"7ch +1ZONE" and press ENTER.
6
Press ON SCREEN to exit from the
on-screen menu.
Controlling Zone2
Follow the procedure below to enable Zone2 output and
select an input source for Zone2.
1
Set MAIN/ZONE2 to "ZONE2".
This changes the zone (main zone or Zone2)
that is controlled by the remote control.
z
AV
AV 1–4
1
2
3
4
V-AUX
5
5
6
6
7
7
V-AUX
AUDIO 1–4
AUDIO
PHONO
1
2
3
4
USB
PHONO
MULTI
MULTI
USB
NET
NET
TUNER
TUNER
MAIN
ZONE 2
PARTY
PARTY
HDMI OUT
HDMI OUT
MAIN/ZONE2
SCENE
SCENE
2
Press z (receiver power).
Each time you press the key, Zone2 is enabled
or disabled.
When Zone2 is enabled, "ZONE2" lights up in
the front display.
Zone2:On
ZONE
2
Lights up
3
Use the following keys to select an input
source.
AV 1–4: AV 1–4 (AUDIO) jacks
V-AUX: VIDEO AUX (AUDIO) jacks (on the front
panel)
AUDIO 1–4: AUDIO 1–4 (AUDIO) jacks
PHONO: PHONO jacks
USB: USB jack (on the front panel)
NET: NETWORK jack (press repeatedly to
select a desired network source)
TUNER: FM/AM radio
• If you have made more than one audio connection for AV 1–4,
V-AUX or AUDIO 1–2, audio signals input to the unit from the
external device is determined according to the "Audio Select"
setting in the "Option" menu. For details, refer to the Owner's
Manual in the supplied CD-ROM.
• You cannot select USB and network sources exclusively for
each zone. For example, if you select "SERVER" for Zone2
when "USB" is selected for the main zone, the input source for
the main zone also switches to "SERVER".
4
Start playback on the external device or
select a radio station.
For details about the playback operation, refer to
the instruction manual for the external device or
Owner's Manual on the supplied CD-ROM.
VOLUME
3