Yamaha HTR-5920 Kullanıcı El Kitabı - Sayfa 21

Alıcı Yamaha HTR-5920 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha HTR-5920 45 sayfaları. Digital home theater system av receiver
Ayrıca Yamaha HTR-5920 için: Servis Kılavuzu (38 sayfalar)

Sayfayı Yazdır

Connecting the FM and AM

antennas

Both FM and AM indoor antennas are supplied with this

unit. In general, these antennas should provide sufficient

signal strength. Connect each antenna correctly to the

designated terminals.

Outdoor AM antenna

Use a 5 to 10 m (16 to 32 ft) of

vinyl-covered wire extended

outdoors from a window.

AM ANT

75Ω UNBAL.

FM ANT

TUNER

Ground

For maximum safety and

minimum interference,

connect the antenna GND

terminal to a good earth

ground. A good earth

ground is a metal stake

driven into moist earth.

Connecting the AM loop antenna

Set up the AM loop antenna.

AM loop

Indoor FM

antenna

(supplied)

GND

Press and hold the tab of the AM ANT

terminal.

Insert one of the AM loop antenna lead wires

into the AM ANT terminal.

Release the tab of the AM ANT terminal back

into place.

Repeat steps 2 through 4 to connect the

other lead wire to the GND terminal.

Once you have properly connected the AM loop

antenna to this unit, orient the AM loop antenna for

the best reception when you tune into AM stations.

Notes

• The AM loop antenna should be placed away from this unit.

• A properly installed outdoor antenna provides clearer reception

than an indoor one. If you experience poor reception quality, an

outdoor antenna may improve the quality. Consult the nearest

authorized YAMAHA dealer or service center about outdoor

antennas.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

CONNECTIONS