Yamaha MCX-2000A Manuel - Sayfa 4

Alıcı Yamaha MCX-2000A için çevrimiçi göz atın veya pdf Manuel indirin. Yamaha MCX-2000A 13 sayfaları. Digital audio receiver

Sayfayı Yazdır

CAUTION: READ THIS BEFORE OPERATING THIS UNIT

• To assure the ﬁnest performance, please read this manual carefully.

Keep it in a safe place for future reference.

• Install this unit in a well ventilated, cool, dry, clean place — away from

direct sunlight, heat sources, vibration, dust, moisture, and/or cold.

Avoid ventilation space of at least 30 cm on the top, 20 cm on the left

and right, and 10 cm on the back of this unit.

• Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds.

• Do not expose this unit to sudden temperature changes from cold to

hot, and do not locate this unit in a environment with high humidity

(i.e. a room with a humidiﬁer) to prevent condensation inside this unit,

which may cause an electrical shock, ﬁre, damage to this unit, and/or

personal injury.

• Avoid installing this unit where foreign object may fall onto this unit

and/or this unit may be exposed to liquid dripping or splashing. On the

top of this unit, do NOT place:

• Other components, as they may cause damage and/or discoloration on

the surface of this unit.

• Burning objects (i.e. candles), as they may cause ﬁre, damage to this

unit, and/or personal injury.

• Containers with liquid in them, as they may fall and liquid may

electrical shock to the user and/or damage to this unit.

• Do not cover the rear panel of this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause ﬁre, damage to this unit, and/or

personal injury.

• Do not plug in this unit to a wall outlet until all connections are

complete.

• Do not operate this unit upside-down. It may overheat, possibly causing

damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cord from the wall outlet, grasp the

plug; do not pull the cord.

• Do not clean this unit with chemical solvents; this might damage the

ﬁnish. Use a clean, dry cloth.

• Only voltage speciﬁed on this unit must be used. Using this unit with a

higher voltage than speciﬁed is dangerous and may cause ﬁre, damage

to this unit, and/or personal injury. YAMAHA will not be held

responsible for any damage resulting from use of this unit with a

voltage other than speciﬁed.

• To prevent damage by lightning, disconnect the power cord from the

wall outlet during an electrical storm.

• Do not attempt to modify or ﬁx this unit. Contact qualiﬁed YAMAHA

service personnel when any service is needed. The cabinet should never

be opened for any reasons.

• When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the AC power plug from the wall outlet.

• Be sure to read the "TROUBLESHOOTING" section on common

operating errors before concluding that this unit is faulty.

• Before moving this unit, ﬁrst check that there is no disc in the disc tray.

Finally, press STANDBY/ON to turn off this unit, and disconnect the

AC power plug from the wall outlet.

• The Socket-outlet shall be installed near the equipment and shall be

easily accessible.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Laser component in this product is capable of emitting radiation

exceeding the limit for Class 1.

IMPORTANT!

Please record the serial number of this unit in the space below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner's Manual in a safe place for future reference.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT

The wires in this mains lead are coloures in accordance with the

following code:

GREEN-and-YELLOW: Earth

BLUE: Neutral

BROWN: Live

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the terminals

in your plug proceed as follows: The wire which is coloured GREEN-

and-YELLOW must be connected to the terminal in the plug which is

marked by the letter E or by the safety earth symbol

GREEN or GREEN-and -YELLOW. The wire which is coloured

BLUE must be connected to the terminal which is marked with the

letter N or coloured BLACK. The wire which is coloured BROWN

must be connected to the terminal which is marked with the letter L

or coloured RED.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied

with this appliance, it should be cut off and an appropriate 3 pin plug

ﬁtted. For details, refer to the instructions described above.

Note: The plug severed from the mains lead must be destroyed, as a plug

with bared ﬂexible cord is hazardous if engaged in a live socket outlet.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and

fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

Do not remove the connector of built-in antenna from the MCX-2000.

or coloured