Yamaha Piano Craft RX-E600 Kullanıcı El Kitabı - Sayfa 17

Alıcı Yamaha Piano Craft RX-E600 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha Piano Craft RX-E600 26 sayfaları. Yamaha rx-e600: owners manual
Ayrıca Yamaha Piano Craft RX-E600 için: Kullanıcı El Kitabı (23 sayfalar)

Sayfayı Yazdır

1. Specifications

Before using the timer

If you want to use the cassette deck, KX-E300 or the MD

Recorder, MDX-E300 for timer play or recording, you

must first make the connections as shown in "Connecting

the system" on page 5. For details, refer to the instructions

supplied with the MDX-E300 or KX-E300.

Timer play and recording

By using the built-in timer, you can have the unit turn on

at a specified time and begin playing or recording

automatically. You can also specify the turn off time.

DISPLAY

NATURAL SOUND

STANDBY/ON

DISPLAY

MEMORY

AUTO/MAN'L

TIMER

TIMER ADJ

BASS

PHONES

–

TIMER

Press DISPLAY.

Whenever DISPLAY is pressed, the display mode

changes as follows:

1. Clock Time (TIMER on/off mode)

If you have not set the clock yet "Set Clock"

appears. You need to set the current time as

described on page 6.

2. Timer Input

Select the source to be played by turning INPUT.

• Timer recording is possible only when you

select TUNER or AUX.

0108CRXE400(M).15-16.E

USING THE BUILT-IN TIMER

HOUR

MIN

VOLUME

STEREO RECEIVER

RX–E600

PRESET/BAND

PRESET/TUNING

MIN

MAX

TIMER

HOUR

MIN

INPUT

TREBLE

BALANCE

–

INPUT

USING THE BUILT-IN TIMER

3. Timer REC

Select the recording component by turning

INPUT. If you like to enjoy timer play with

TUNER or AUX, select "REC Mode OFF".

(Example)

4. ON Time

"ON Time" appears on the display for a second,

and changed to the time setting mode.

Press HOUR to set the hour.

Press MIN to set the minute.

5. OFF Time

Set the time the same way as above.

If you set the ON time but not OFF time, the timer

play or recording will finish automatically after an

hour.

Notes

• The display mode will change in about 8 seconds. If the

mode is changed before the setting is completed, call the

mode again by pressing DISPLAY once or more.

• If you select the input other than TUNER and AUX on

"2. Timer Input", "3. Timer REC" is skipped.

Press TIMER to complete the timer setting.

The system is put in the standby mode.

• TIMER indicator lights up.

If you continue using the system, press STANDBY/

ON to turn on this unit.

To cancel the timer play setting

Press DISPLAY to show the current time, then press

TIMER so that "TIMER" goes off from the display. You

can also cancel by pressing TIMER in standby mode.

Note

• In the event of a power failure or when the AC power cord is

disconnected for more than five minutes, you must reset the

clock.

2004.06.15, 19:09