Calian SatService sat-nms Kullanıcı Kılavuzu - Sayfa 13

Kontrolör Calian SatService sat-nms için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Calian SatService sat-nms 17 sayfaları. Power sensor

frequency response calibration. This value is zero unless you set a measurement frequency with

the 'freq' parameter. The 'fcor' parameter is read-only, the value only can be set by changing the

'freq' parameter.

offs

The value [dB] specified with this parameter is added to the measured power before it is

displayed and compared to the fault threshold value. If 'offs' is set to zero, the power sensor

shows the power which is measured at it's input connector. The valid range for 'offs' is -99.99 to

99.99.

snr

The power sensor's serial number. This is a five digit hexadecimal number which uniquely

identifies each individual unit. 'snr' is a read-only parameter.

Floating point numbers (as for the 'thrh' and 'offs' parameters) may consist of digits, one optional decimal

point and a leading minus sign for negative numbers. The 'freq' parameter is restricted to be a positive

integer, it may consist of digits only. Malformed numbers are recognized as zero.

www.satnms.com

PS-UM-2002 Page 12/16