Yamaha A-52100 Kullanıcı El Kitabı - Sayfa 11
Amplifikatör Yamaha A-52100 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha A-52100 42 sayfaları. Integrated amplifier
Sayfayı Yazdır
®
AUTO POWER STANDBY switch
ON: The unit
enters
STANDBY mode automatically
if not operated for 8 hours.
OFF: The unit does not enter STANDBY mode
automatically.
@
TRIGGER IN jack
Use
this jack to connect an external component for the
trigger function.
For details on the connection, see page 22.
@
REMOTE IN/OUT jacks
Use
these jacks to connect an external component for
remote control.
For details on the connection, see page 21.
@
SYSTEM CONNECTOR
Use
this
connector to connect
a
product testing device
for
servicing.
@
AC IN inlet
Use this inlet to plug in the supplied power cable.
For
details on the connection, see page 19.
@Foot
The
feet
of
this unit include built-in spikes. Using the
spikes can reduce the effect of vibrations on the set.
When using the spikes, remove the transport tape, then
remove the magnet foot by pulling it.
Transport
- - - ¥ \
tape
Caution
¢~··;~
~Magnet
foot
• Take care that the magnet foot is not
accidentally
swallowed by
small
children.
• When using the feet's built-in
spikes,
the spikes may
scratch
the shelf or floor on which this unit is installed.
Use
the magnet feet or
appropriate supports when
placing this
unit on expensive furniture,
etc.
,,,
:<t>~
If this unit is unstable, you
can
adjust the foot height by
rotating
it.
11
En
I