Yamaha A-S300 Kullanıcı El Kitabı - Sayfa 12

Amplifikatör Yamaha A-S300 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha A-S300 22 sayfaları. Integrated amplifier
Ayrıca Yamaha A-S300 için: Kullanıcı El Kitabı (42 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (38 sayfalar)

Sayfayı Yazdır
Yamaha A-S300 Kullanıcı El Kitabı

OPERATION

Playing a source

SPEAKERS
A
INPUT
VOLUME
1
Rotate the VOLUME control on the front
panel to the extreme counterclockwise
position.
2
Press A switch on the front panel inward to
turn on this unit.
3
Rotate the INPUT selector on the front panel
(or press one of the INPUT selector buttons
on the remote control) to select the input
source you want to listen to.
The indicator for the selected input source lights up.
4
Rotate the SPEAKERS selector on the front
panel to select SPEAKERS A, B or A+B.
Notes
• Set the SPEAKERS selector to the A+B position when two sets
of speakers are connected using bi-wire connections, or when
using two sets of speakers simultaneously (A and B).
• If you do not want sound to be heard from the speakers while
listening with headphones, set the SPEAKERS selector to OFF.
8
En

PLAYING AND RECORDING

VOLUME
INPUT
5
Play the selected input source.
6
Rotate the VOLUME control on the front
panel (or press VOLUME +/– buttons on the
remote control) to adjust the sound output
level.
y
You can adjust the tonal quality by using the BASS, TREBLE,
BALANCE and LOUDNESS controls, or the PURE DIRECT
switch on the front panel.
7
When finished listening, press A switch on
the front panel outward to turn off this unit.
y
If A button on the remote control is pressed while the A switch on
the front panel is in the on position, this unit enters standby mode.
Press A button again to turn this unit on.

Adjusting the tonal quality

TREBLE
BASS
■ Using the PURE DIRECT switch
Routes input signals from your audio sources. As a result,
the input signals bypass the BASS, TREBLE, BALANCE
and LOUDNESS controls, thus eliminating any alterations
to the audio signals to produce more direct and high-grade
sound from all input sources.
Note
The BASS, TREBLE, BALANCE and LOUDNESS controls do
not function while the PURE DIRECT switch is turned on.
LOUDNESS
VOLUME
BALANCE
PURE
DIRECT