Yamaha A-S3200 Kullanıcı El Kitabı - Sayfa 19

Amplifikatör Yamaha A-S3200 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha A-S3200 32 sayfaları.

Note

All connections must be correct: L (left) to L, R (right) to R, "+" to

"+", and "−" to "−". For information regarding the connection

procedure, refer to the owner's manual for your speakers.

■ Using banana plug cables

(Models for U.S.A., Canada, Australia, China, and Taiwan)

First tighten the knob on the SPEAKERS

terminal, and then insert the banana plug into

the head of the knob.

Banana plug

Unscrew the knob, and then sandwich the

Y-shaped lug between the ring part and

base of the terminal.

Tighten the knob.

Diameter of the

banana plug hole: 4.0 mm

Y-shaped lug

Thickness of the

terminal core: 5.8 mm

A bi-wired connection separates the woofer from the mid

and high ranges. Speakers that support bi-wired

connection feature two pairs of terminals (total four

terminals). These two pairs of terminals can divide the

speakers into two independent parts. To make this kind of

connection, you need to connect mid and high range

drivers to one pair of terminals, and low range drivers to

the other pair of terminals.

Remove the shorting bars or bridges on the

speakers.

Connect this unit to the speakers as shown

in the figure below.

An example of left channel connection

Rear panel of this unit

Set the SPEAKERS selector on the front

panel to A+B BI-WIRING.

Speaker