Yamaha AS1000 - Amplifier Kullanıcı El Kitabı - Sayfa 16
Amplifikatör Yamaha AS1000 - Amplifier için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha AS1000 - Amplifier 38 sayfaları. Yamaha a-s1000 stereo amplifier owner's manual
Sayfayı Yazdır
Connections
Caution
If you use two sets (A and B), the impedance of each speaker
must be 8 : or higher. When only using one set of speakers (A or
B), use speakers with an impedance of 4 : or higher.
■ Connecting the speakers
1
Remove approximately 10 mm (0.4 in) of
insulation from the end of each speaker
cable and twist the exposed wires of the
cable together to prevent short circuits.
10 mm (0.4 in)
2
Unscrew the knob and then insert the bare
wire into the hole.
3
Tighten the knob.
16
En
■ Connecting the speakers using the
banana plug
(Except for Europe models)
First, tighten the knob and then insert the banana
plug into the end of the corresponding terminal.
Banana plug
■ Connecting the speakers using the
Y-shaped lug
1
Unscrew the knob and then sandwich the
Y-shaped lug between the ring part and base.
Y-shaped lug
Slide
2
Tighten the knob.