Yamaha C-5000 Kullanıcı El Kitabı - Sayfa 11

Amplifikatör Yamaha C-5000 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha C-5000 44 sayfaları.

BAL 1/BAL 2 jacks

These are two sets of XLR-type balanced input jacks. If

the INPUT selector is set to BAL 1 or BAL 2, signals at

the corresponding XLR jacks will be the input source.

Note

Set the ATTENUATOR selector and PHASE selector

appropriately for the playback components that are

connected to the unit .

ATTENUATOR selector

Enables you to set the allowable input level for the XLR-

type balanced input jacks (BAL 1 and BAL 2 jacks). For

more information, refer to "Adjusting the volume level"

(page 30).

BYPASS: The allowable input level will not change.

Usually select this option.

ATT (−6 dB): The input gain will be lowered by 6 dB

to raise the allowable input level. Select this option if

the audio output from the connected component sounds

distorted.

* The illustration above shows the model for Europe

PHASE selector

Specifies the HOT pin position for the XLR-type

balanced input jacks (BAL 1 and BAL 2 jacks).

NORMAL: Pin #2 is specified as HOT.

INV : Pin #3 is specified as HOT.

For more information, refer to "Balanced and unbalanced

connections" (page 14).

TUNER jacks

These are RCA input jacks. If the INPUT selector is set

to TUNER, signals at these jacks will be the input source.

Connect your tuner here.