Yamaha DSP-A592 Kullanıcı El Kitabı - Sayfa 22
Amplifikatör Yamaha DSP-A592 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha DSP-A592 34 sayfaları. Natural sound av amplifier
Sayfayı Yazdır
9
9
Adjust the sound output levels of the center speaker
and the rear speakers so that they become almost as
same as that of the main speakers.
a) Press once or more so that "CENTER" or "REAR"
appears on the display.
* Select "CENTER" to adjust the output level of the
center speaker, and select "REAR" to adjust the
output level of the rear speakers.
DSP-A592
DELAY/CENTER
/REAR/SWFR
b) Adjust its level.
* Pressing the + side raises and the – side lowers the
level.
22
DSP-A592
10
TIME/
DELAY/CENTER
–
+
LEVEL
TEST
EFFECT
/REAR/SWFR
ON/OFF
PROGRAM
PROLOGIC ENHANCED
V–AUX
VCR
TV/DBS
DVD/LD
2CH/6CH
PLAY
DIR A
DIR B
REC/PAUSE
TAPE
A/B
–
+
A/B/C/D/E
TUNER
PRESET
PLAY
DISC
CD
PHONO
POWER
VOLUME
SLEEP
DSP-A492
DELAY/CENTER
/REAR
TIME/
–
+
LEVEL
DSP-A492
TIME/
DELAY/CENTER
–
+
LEVEL
/REAR
PROGRAM
PROLOGIC ENHANCED
9
VCR
DIR A
DIR B
REC/PAUSE
–
+
A/B/C/D/E
PRESET
DISC
POWER
VOLUME
SLEEP
10
Cancel the test tone.
TEST
Notes
Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using
the VOLUME control (or the VOLUME keys on the remote
control transmitter) only.
If you use external power amplifiers, you may also use
their volume controls to achieve proper balance.
In step 9, if the center channel mode is in the
"PHANTOM" position, the sound output level of the center
speaker cannot be adjusted. This is because in this
mode, the center sound is automatically output from the
left and right main speakers.
<
U.K. and Europe models only
If there is insufficient sound output from the center and
rear speakers, you may decrease the main speaker
output level by setting the MAIN LEVEL switch on the
rear panel to "–10 dB".
10
TEST
EFFECT
ON/OFF
TV/DBS
DVD/LD
PLAY
TAPE
A/B
TUNER
PLAY
CD
PHONO
Disappears.
>