Yamaha DSP-A990 Kullanım Kılavuzu - Sayfa 31

Amplifikatör Yamaha DSP-A990 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Yamaha DSP-A990 50 sayfaları. Digital sound field processing amplifier

Sayfayı Yazdır

2-2. RECORDING A SOURCE TO AUDIO/VIDEO TAPE

(OR DUBBING FROM A TAPE TO ANOTHER)

To record the input source

1. Press the REC OUT switch (so that "REC OUT ... " appears on the

display and the monitor screen).

Front panel

2. Within 5 seconds, select the "SOURCE" position with the input

selector switch (so that "REC OUT SOURCE" appears on the

display panel and the monitor screen).

Front panel

INPUT SELECTOR

REC OUT SOURCE

VCR I

3. Press the REC OUT switch (so that "REC OUT SOURCE"

disappears from the display).

* The same result will be obtained after 5 seconds without any

operation.

4. Select an input source to be played (and to be recorded).

(See page 28 for the method of input source selection.)

Front panel

INPUT SELECTOR

VCR I

TV/DBS

PHONO

5. Play the source.

6. Set the tape deck or VCR used for recording to the recording

mode.

Adjust the recording level on the tape deck or VCR.

NOTE: To record picture from a video source and sound from

another audio source, in step 4, first select a video source with an

input selector switch on the front panel, and then select an audio

source with the input selector keys on the remote control unit.

Remote Control