Yamaha YX10ZXPSL 2020 Servis Kılavuzu - Sayfa 13

Arazi Aracı Yamaha YX10ZXPSL 2020 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Yamaha YX10ZXPSL 2020 21 sayfaları.

Sayfayı Yazdır

[Coolant temperature display]

1. Coolant temperature display

When the coolant temperature is in the normal

operating range, the temperature will be dis-

played. When the coolant temperature is low,

"LO" will be displayed. When the coolant tem-

perature rises, the coolant temperature display

will begin to flash. If the coolant temperature

continues to rise, the message "HI" will flash.

TIP

• The coolant temperature display can be set to

"°C" or "°F". To switch the temperature units,

turn the key to "

" (off), then hold the "RE-

SET" button pushed and turn the key to "

(on).

• The radiator fan turns on and off automatically

according to the coolant temperature.

Fuel gauge

1. Fuel gauge

The fuel gauge indicates the amount of fuel in

the fuel tank. The display segments of the fuel

gauge disappear from "F" (full) towards "E"

(empty) as the fuel level decreases. When the

last segment of the fuel gauge starts flashing, re-

fuel as soon as possible.

TIP

This fuel gauge is equipped with a self-diagnosis

system. If a problem is detected in an electrical

circuit, the fuel gauge will flash repeatedly. If this

occurs, check the electrical circuit.

Refer to "SIGNALING SYSTEM" on page 9-23.

Transmission gear display

1. Transmission gear display

2. Neutral indicator light "N"

This display shows the selected gear. The neu-

tral position is indicated by "N" and by the neutral

indicator light "N".

Shift light control mode

1. Shift light

2. "MODE" button

3. "RESET" button

The shift light has three settings which can be

adjusted.

• Flashing pattern: this function allows you to

choose whether or not the light will come on

and whether it should flash or stay on when ac-

tivated.

• Activation point: this function allows you to se-

lect the engine speed at which the light is acti-

vated.

• Deactivation point: this function allows you to

select the engine speed at which the light is de-

activated.

1-4

FEATURES