Yamaha ATS-1010 Kullanıcı El Kitabı - Sayfa 12
Hoparlör Sistemi Yamaha ATS-1010 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha ATS-1010 19 sayfaları. Front surround system
Ayrıca Yamaha ATS-1010 için: Kullanıcı El Kitabı (20 sayfalar)
Sayfayı Yazdır
l_2r_[_[_[ol#Dlll_[oldlnDI¢[oli
Press VOLUME +/- to adjust the volume
level.
[1110
SURROUND CLEARV01CE UNJVOLUNE
DTS
[]
[]
[]
[]
Up .......
_" Down
The color of FII'ID DTS inclicator changes
depending
on
the adjustable
range. Green indicates
a lower volume
level, orange a moderate
level, and red a higher leveh
Note that when the FlrlD DTS indicator is red, the volume is
set to a higher level. Excessive sound may damage your
hearing or bother others.
\ll
..- @-_
To turn off the volume temporarily,
press
MUTE
MUTE.
To resume the volume, press MUTE again or
press VOLUME +_.
Press
SUBWOOFER
+/- to adjust
the bass
level.
The color of lIPID DTS indicator
changes
depending
on
the bass level. Green indicates
a minus level, orange a
standard
level (default
value is 0), and red a plus level.
You can use 1his function
to delay sOUnLIto synchronize
with a lagging video image.
1
Press
and
hold
AUDIO
DELAY
more
than
3 seconds
to enter
D[LAY
adjustment
mode.
2
D[10
iNPUT
SURROUND
CLEAR VOICE
UNIVOLNNE
DT8
D[I
PL_
..m..
[]
[]
[]
[]
[]
Flashes in green (_, P. 11)
Press SUBWOOFER
+/- to adjust the
delay time. (+ increases the delay time)
IXIR
iNPUT
SURROUND
CLEAR VOICE
UNiVOLDME
OTS
DO
PLO
..Ill.
[]
[]
D
D
[]
Make the delay time longer
Make the delay time
shorter
The color of lIPID DTS indicator
changes
depending
on
the adjustable
range. Green indicates
a shomer delay time,
orange
a medium
delay,
and red a longer delay.
3
Press
AUDIO
DELAY
to exit the
adjustment
mode.
\1/
The adjustment mode is canceled if" the unit is ]eft for 20
seconds without any operation being performed.
Although the unit has a subwoofer built-in, you can use
commercially available powered subwoofcr of your
choice. Refer to "Alternative connections" (_ P. 5).
1
Set the unit to standby mode.
2
Press both the VOLUME - button and
button of the main unit, release the (_
button first, then release the VOLUME -
button.
This unit is turned on when switching
between
the
built-in
subwoofcr
and external subwoolbr.
The SURROUND
indicator
lights up as the following
illustration.
Check if the setting is correct.
(_, P. 11)
NNtn
The SURROUND
indicator (for 2
SURROUND
SURROUND
seconds after Ihe
%m,.
[]
unil is turned on)
Green
No light
• The default
setting is playback
of the built-in
subwoofcr.
• You can verify the current setting by turning
the
unit on again from standby
mode.
You cannot
use the built-in
subwoofer
and the external
subwoofer
simtlltaneousl.v.
SEn