Yamaha BR12 Kullanıcı El Kitabı - Sayfa 2
Hoparlör Sistemi Yamaha BR12 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha BR12 7 sayfaları. Speaker systems
Ayrıca Yamaha BR12 için: Kullanıcı El Kitabı (8 sayfalar), Servis Kılavuzu (18 sayfalar), (İngilizce) Kullanım Kılavuzu (7 sayfalar), (Fransızca) Mode D'emploi (7 sayfalar), (Almanca) Kullanım kılavuzu (7 sayfalar)
Sayfayı Yazdır
Thank you for choosing the YAMAHA speaker system. In order to take maximum advantage of the speaker's features and ensure
maximum performance and longevity, please read this manual carefully before using the speaker system. Keep the manual in a
safe place for future reference.
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not open
• Do not open the device or attempt to disassemble the internal parts or
modify them in any way. The device contains no user-serviceable parts.
If it should appear to be malfunctioning, discontinue use immediately
and have it inspected by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the device or other property. These precautions include, but are not limited to, the following:
Location
• If you use a stand, make sure to observe the following precautions in
order to avoid toppling the device or causing damage to the internal
components.
- Check the stand's specifications and make sure that it is sturdy enough to
support the weight of the speaker.
- Mount only one speaker on each speaker stand.
- Use the supplied screws if included.
- Tighten fastening screws securely.
- Use the speaker stands with their legs fully opened.
- Use the stand at a height of less than 140cm (55").
- Add weight such as sand bags around the stand legs to prevent them from
falling over.
- Remove the speakers from the stands before moving the stands or adjusting
their height.
- Limit the number of people around the placed stand.
We recommend using the
TS-80 and TS-90
by Ultimate Systems (sold separately) to support the speakers.
2
PRECAUTIONS
speaker stands manufactured
(6)-1
Water warning
• Do not expose the device to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might
spill into any openings.
• When transporting or moving the device, always use two or more
people. Attempting to lift the device by yourself may damage your back,
result in other injury, or cause damage to the device itself.
• Before moving the device, remove all connected cables.
• Do not use the speaker' s handles for suspended installation. Doing so
can result in damage or injury.
• Do not expose the device to excessive dust or vibrations, or extreme
cold or heat (such as in direct sunlight, near a heater, or in a car during
the day) to prevent the possibility of panel disfiguration or damage to
the internal components.
• Do not place the device in an unstable position where it might
accidentally fall over.